Sign in
Search 68hc12
Subscribe to 68hc12
68hc12 by Keywords
68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC
Ads
Discussion Groups
See Also
Discussion Groups | 68HC12 | Quick question for the metrowerks codewarrior
Join our technical discussions about Freescale Microcontrollers: M68HC12. (Freescale Semiconductor is a Subsidiary of Motorola).
Quick question for the metrowerks codewarrior - mortisgr - Jan 17 15:23:00 2006
Hello all, I've got some questions for metrowerks codewarrior v3.1
I am working on M68HC12B32 EVB
With burner.bbl i can make an .s19 record,how can i make a .lst ?
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
I am working on M68HC12B32 EVB
With burner.bbl i can make an .s19 record,how can i make a .lst ?
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Quick question for the metrowerks codewarrior - Honnold John-r37277 - Jan 17 15:35:00 2006
The first thing you need to do is press Alt-F7 to open the
Settings from the IDE. Then under the Target heading select the
Assembler for HC12. Then select the Options button. The Output will
show you the available output options. Select everything in the list
except for the 3rd, 4th and last line. This will give you a basic
listing file. If you start deselecting some of the other lines you will
find that the file can get rather large, but you may need some of these
parameters listed. You could also select the 3rd line (Configure
Listing File) if you want to get very specific contents in your .lst
file. Hope this helps.
Regards,
John Honnold
Freescale Semiconductor
Technical Information Center
MCU 16/32 Bit Applications Engineer
----------------------------------------------------------
This email has been classified:
(x) Freescale General Business
( ) Freescale Confidential Proprietary
( ) Freescale Internal Use Only
( ) Public
-----Original Message-----
From: 68HC12@68HC... [mailto:68HC12@68HC...] On Behalf
Of mortisgr
Sent: Tuesday, January 17, 2006 12:24 PM
To: 68HC12@68HC...
Subject: [68HC12] Quick question for the metrowerks codewarrior Hello all, I've got some questions for metrowerks codewarrior v3.1 I am
working on M68HC12B32 EVB
With burner.bbl i can make an .s19 record,how can i make a .lst ? Yahoo! Groups Links
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: Quick question for the metrowerks codewarrior - mortisgr - Jan 18 12:38:00 2006
Thanks John,
I also needed to tick in the compiler settings, at the output tab in
options, the generate listing file box and it worked.
Thanks again
Tassos
--- In 68HC12@68HC..., "Honnold John-r37277"
<john.honnold@f...> wrote: >
> The first thing you need to do is press Alt-F7 to open the
> Settings from the IDE. Then under the Target heading select the
> Assembler for HC12. Then select the Options button. The Output will
> show you the available output options. Select everything in the list
> except for the 3rd, 4th and last line. This will give you a basic
> listing file. If you start deselecting some of the other lines you will
> find that the file can get rather large, but you may need some of these
> parameters listed. You could also select the 3rd line (Configure
> Listing File) if you want to get very specific contents in your .lst
> file. Hope this helps.
>
> Regards,
>
> John Honnold
> Freescale Semiconductor
> Technical Information Center
> MCU 16/32 Bit Applications Engineer
> ----------------------------------------------------------
> This email has been classified:
> (x) Freescale General Business
> ( ) Freescale Confidential Proprietary
> ( ) Freescale Internal Use Only
> ( ) Public >
> -----Original Message-----
> From: 68HC12@68HC... [mailto:68HC12@68HC...] On Behalf
> Of mortisgr
> Sent: Tuesday, January 17, 2006 12:24 PM
> To: 68HC12@68HC...
> Subject: [68HC12] Quick question for the metrowerks codewarrior > Hello all, I've got some questions for metrowerks codewarrior v3.1 I am
> working on M68HC12B32 EVB
>
> With burner.bbl i can make an .s19 record,how can i make a .lst ? > Yahoo! Groups Links
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
I also needed to tick in the compiler settings, at the output tab in
options, the generate listing file box and it worked.
Thanks again
Tassos
--- In 68HC12@68HC..., "Honnold John-r37277"
<john.honnold@f...> wrote: >
> The first thing you need to do is press Alt-F7 to open the
> Settings from the IDE. Then under the Target heading select the
> Assembler for HC12. Then select the Options button. The Output will
> show you the available output options. Select everything in the list
> except for the 3rd, 4th and last line. This will give you a basic
> listing file. If you start deselecting some of the other lines you will
> find that the file can get rather large, but you may need some of these
> parameters listed. You could also select the 3rd line (Configure
> Listing File) if you want to get very specific contents in your .lst
> file. Hope this helps.
>
> Regards,
>
> John Honnold
> Freescale Semiconductor
> Technical Information Center
> MCU 16/32 Bit Applications Engineer
> ----------------------------------------------------------
> This email has been classified:
> (x) Freescale General Business
> ( ) Freescale Confidential Proprietary
> ( ) Freescale Internal Use Only
> ( ) Public >
> -----Original Message-----
> From: 68HC12@68HC... [mailto:68HC12@68HC...] On Behalf
> Of mortisgr
> Sent: Tuesday, January 17, 2006 12:24 PM
> To: 68HC12@68HC...
> Subject: [68HC12] Quick question for the metrowerks codewarrior > Hello all, I've got some questions for metrowerks codewarrior v3.1 I am
> working on M68HC12B32 EVB
>
> With burner.bbl i can make an .s19 record,how can i make a .lst ? > Yahoo! Groups Links
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: Quick question for the metrowerks codewarrior - Honnold John-r37277 - Jan 18 14:46:00 2006
Tassos:
Sorry about that. I forgot to mention that you need to do this for
both compiler and/or assembler depending on what you are writing your
code in. Glad I could help.
Regards,
John Honnold
Freescale Semiconductor
Technical Information Center
MCU 16/32 Bit Applications Engineer
----------------------------------------------------------
This email has been classified:
(x) Freescale General Business
( ) Freescale Confidential Proprietary
( ) Freescale Internal Use Only
( ) Public -----Original Message-----
From: 68HC12@68HC... [mailto:68HC12@68HC...] On
Behalf Of mortisgr
Sent: Wednesday, January 18, 2006 9:38 AM
To: 68HC12@68HC...
Subject: [68HC12] Re: Quick question for the metrowerks
codewarrior Thanks John,
I also needed to tick in the compiler settings, at the output
tab in
options, the generate listing file box and it worked.
Thanks again
Tassos
--- In 68HC12@68HC..., "Honnold John-r37277"
<john.honnold@f...> wrote: >
> The first thing you need to do is press Alt-F7 to open
the
> Settings from the IDE. Then under the Target heading select
the
> Assembler for HC12. Then select the Options button. The
Output will
> show you the available output options. Select everything in
the list
> except for the 3rd, 4th and last line. This will give you a
basic
> listing file. If you start deselecting some of the other
lines you will
> find that the file can get rather large, but you may need some
of these
> parameters listed. You could also select the 3rd line
(Configure
> Listing File) if you want to get very specific contents in
your .lst
> file. Hope this helps.
>
> Regards,
>
> John Honnold
> Freescale Semiconductor
> Technical Information Center
> MCU 16/32 Bit Applications Engineer
> ----------------------------------------------------------
> This email has been classified:
> (x) Freescale General Business
> ( ) Freescale Confidential Proprietary
> ( ) Freescale Internal Use Only
> ( ) Public >
> -----Original Message-----
> From: 68HC12@68HC... [mailto:68HC12@68HC...]
On Behalf
> Of mortisgr
> Sent: Tuesday, January 17, 2006 12:24 PM
> To: 68HC12@68HC...
> Subject: [68HC12] Quick question for the metrowerks
codewarrior > Hello all, I've got some questions for metrowerks codewarrior
v3.1 I am
> working on M68HC12B32 EVB
>
> With burner.bbl i can make an .s19 record,how can i make a
.lst ? > > . ________________________________
[Non-text portions of this message have been removed]
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Sorry about that. I forgot to mention that you need to do this for
both compiler and/or assembler depending on what you are writing your
code in. Glad I could help.
Regards,
John Honnold
Freescale Semiconductor
Technical Information Center
MCU 16/32 Bit Applications Engineer
----------------------------------------------------------
This email has been classified:
(x) Freescale General Business
( ) Freescale Confidential Proprietary
( ) Freescale Internal Use Only
( ) Public -----Original Message-----
From: 68HC12@68HC... [mailto:68HC12@68HC...] On
Behalf Of mortisgr
Sent: Wednesday, January 18, 2006 9:38 AM
To: 68HC12@68HC...
Subject: [68HC12] Re: Quick question for the metrowerks
codewarrior Thanks John,
I also needed to tick in the compiler settings, at the output
tab in
options, the generate listing file box and it worked.
Thanks again
Tassos
--- In 68HC12@68HC..., "Honnold John-r37277"
<john.honnold@f...> wrote: >
> The first thing you need to do is press Alt-F7 to open
the
> Settings from the IDE. Then under the Target heading select
the
> Assembler for HC12. Then select the Options button. The
Output will
> show you the available output options. Select everything in
the list
> except for the 3rd, 4th and last line. This will give you a
basic
> listing file. If you start deselecting some of the other
lines you will
> find that the file can get rather large, but you may need some
of these
> parameters listed. You could also select the 3rd line
(Configure
> Listing File) if you want to get very specific contents in
your .lst
> file. Hope this helps.
>
> Regards,
>
> John Honnold
> Freescale Semiconductor
> Technical Information Center
> MCU 16/32 Bit Applications Engineer
> ----------------------------------------------------------
> This email has been classified:
> (x) Freescale General Business
> ( ) Freescale Confidential Proprietary
> ( ) Freescale Internal Use Only
> ( ) Public >
> -----Original Message-----
> From: 68HC12@68HC... [mailto:68HC12@68HC...]
On Behalf
> Of mortisgr
> Sent: Tuesday, January 17, 2006 12:24 PM
> To: 68HC12@68HC...
> Subject: [68HC12] Quick question for the metrowerks
codewarrior > Hello all, I've got some questions for metrowerks codewarrior
v3.1 I am
> working on M68HC12B32 EVB
>
> With burner.bbl i can make an .s19 record,how can i make a
.lst ? > > . ________________________________
[Non-text portions of this message have been removed]
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )