Sign in
Search 68hc12
Subscribe to 68hc12
68hc12 by Keywords
68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC
Ads
Discussion Groups
Discussion Groups | 68HC12 | Codewarrior HC12 V1.2 and USB Multilink ML-12 Rev C.
Join our technical discussions about Freescale Microcontrollers: M68HC12. (Freescale Semiconductor is a Subsidiary of Motorola).
Codewarrior HC12 V1.2 and USB Multilink ML-12 Rev C. - "Guillermo F. Molina" - Jun 6 11:04:04 2007
Hi all,
Did anyone know if it is any chance to use the Hiwave debugger of the
(old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
Thanks in advance.
Best regards,
G.Molina
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Did anyone know if it is any chance to use the Hiwave debugger of the
(old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
Thanks in advance.
Best regards,
G.Molina
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: Codewarrior HC12 V1.2 and USB Multilink ML-12 Rev C. - Alban - Jun 6 14:24:11 2007
--- In 6...@yahoogroups.com, "Guillermo F. Molina" wrote:
>
> Hi all,
>
> Did anyone know if it is any chance to use the Hiwave debugger of the
> (old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
>
> Thanks in advance.
> Best regards,
>
> G.Molina
>
Hello,
>From what I read in Freescale Forum (http://forums.freescale.com/),
this is not possible because of drivers.
If you want to debug only, you can use the new CodeWarrior for free.
IT just has a limitation on the size of code. And you can get a
software from P&E Micro to program without limitation (something like
PROG08): http://pemicro.com
Regards,
Alban.
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
>
> Hi all,
>
> Did anyone know if it is any chance to use the Hiwave debugger of the
> (old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
>
> Thanks in advance.
> Best regards,
>
> G.Molina
>
Hello,
>From what I read in Freescale Forum (http://forums.freescale.com/),
this is not possible because of drivers.
If you want to debug only, you can use the new CodeWarrior for free.
IT just has a limitation on the size of code. And you can get a
software from P&E Micro to program without limitation (something like
PROG08): http://pemicro.com
Regards,
Alban.
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: Re: Codewarrior HC12 V1.2 and USB Multilink ML-12 Rev C. - "Guillermo F. Molina" - Jun 6 14:43:02 2007
Thank you Alban,
I will take a look at the Freescale forum.
I do have an old Paralell Port BDM Multilink that I normally use with
this CW V1.2 system, I was just wondering (as some new notebooks don't
have a LPT) if I can use the USB BDM that I've recently bought from P&E
for HCS12/HCS08 programming.
I also had to buy again the PROG12Z that I use for production, my
PROG12Z version 1.6 didn't work with the new USB Multilink Rev C. , I
thought that from V1.6 to V1.7 was a minor upgrade but...
Best regards,
G.Molina.
Alban wrote:
>
> --- In 6...@yahoogroups.com,
> "Guillermo F. Molina" wrote:
> >
> > Hi all,
> >
> > Did anyone know if it is any chance to use the Hiwave debugger of the
> > (old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
> >
> > Thanks in advance.
> > Best regards,
> >
> > G.Molina
> > Hello,
>
> >From what I read in Freescale Forum (http://forums.freescale.com/
>
> this is not possible because of drivers.
> If you want to debug only, you can use the new CodeWarrior for free.
> IT just has a limitation on the size of code. And you can get a
> software from P&E Micro to program without limitation (something like
> PROG08): http://pemicro.com Regards,
> Alban.
>
>
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
I will take a look at the Freescale forum.
I do have an old Paralell Port BDM Multilink that I normally use with
this CW V1.2 system, I was just wondering (as some new notebooks don't
have a LPT) if I can use the USB BDM that I've recently bought from P&E
for HCS12/HCS08 programming.
I also had to buy again the PROG12Z that I use for production, my
PROG12Z version 1.6 didn't work with the new USB Multilink Rev C. , I
thought that from V1.6 to V1.7 was a minor upgrade but...
Best regards,
G.Molina.
Alban wrote:
>
> --- In 6...@yahoogroups.com
> "Guillermo F. Molina"
> >
> > Hi all,
> >
> > Did anyone know if it is any chance to use the Hiwave debugger of the
> > (old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
> >
> > Thanks in advance.
> > Best regards,
> >
> > G.Molina
> > Hello,
>
> >From what I read in Freescale Forum (http://forums.freescale.com/
>
> this is not possible because of drivers.
> If you want to debug only, you can use the new CodeWarrior for free.
> IT just has a limitation on the size of code. And you can get a
> software from P&E Micro to program without limitation (something like
> PROG08): http://pemicro.com
> Alban.
>
>
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )