68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC

Hi Everyone,

I need PPG(programming pulse generator) module for following
configuration.

a. period 100ms to 1000ms
b. pulse width 0.5ms to 25ms

I will change above both at runtime So I taken runtime setting "from
time interval" in processor expert. I tried a lot but could not
configure it.

Pl tell me how to configure it with best closest values to required
configuration.

Thanks ®ards
Rishi kumar

------------------------------------



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )