Sign in
Search 68hc12
Subscribe to 68hc12
68hc12 by Keywords
68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC
Sponsor
Ads
Discussion Groups
See Also
Discussion Groups | 68HC12 | help : download program using hyperterminal
Join our technical discussions about Freescale Microcontrollers: M68HC12. (Freescale Semiconductor is a Subsidiary of Motorola).
help : download program using hyperterminal - toma...@hotmail.com - Nov 19 2:57:10 2008
Im joining freescale smartcar competition. Freescale give me a kit containing TDBML
programmer and code warrior software. but I keep getting error using the TBDML, and i
decided to use hyperterminal.
The problem is that i cannot detect the change when i already download a program. The LED suppose to turn on and off, but they just dont.
When I first power-on the device, the initial program inside the device blink the LEDs like "knight rider" car. Then I tried to insert new prgm that suppose to make the LEDs on and off. This is what i did.
1st i erase using E commmand
2nd I mistakenly download the prgrm using L command
3rd I redo using F command after re-erase the device.
but nothing works.
I use mc9s12dg128, the kit is s12dg128evk.
Ive tried so many time pls help.
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
The problem is that i cannot detect the change when i already download a program. The LED suppose to turn on and off, but they just dont.
When I first power-on the device, the initial program inside the device blink the LEDs like "knight rider" car. Then I tried to insert new prgm that suppose to make the LEDs on and off. This is what i did.
1st i erase using E commmand
2nd I mistakenly download the prgrm using L command
3rd I redo using F command after re-erase the device.
but nothing works.
I use mc9s12dg128, the kit is s12dg128evk.
Ive tried so many time pls help.
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: help : download program using hyperterminal - toma...@hotmail.com - Nov 19 22:41:25 2008
ok silly me, i figured hw to use bdm..
------------------------------------
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )