Sign in
Search 68hc12
Subscribe to 68hc12
68hc12 by Keywords
68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC
Ads
Discussion Groups
See Also
Discussion Groups | 68HC12 | MC9S12A256B vs MC9S12DP256B (and CodeWarrior)
Join our technical discussions about Freescale Microcontrollers: M68HC12. (Freescale Semiconductor is a Subsidiary of Motorola).
MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - varneybob - Jan 22 19:03:00 2003
|
I'm using CodeWarrior for HC(S)12. We've been using an eval board with the MC9S12DP256B MCU, but are actual MCU is the MC9S12A256B. I cannot get CodeWarrior to talk to the MCU via the P&E BDM Multilink cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU-ID drop-down list (it _does_ list the MC9S12DP256B). Any help would be appreciated! |
|
|
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Wayne Bui - Jan 22 19:28:00 2003
|
I had the same problem like you have. After troubleshooting, I have found out that the PLL circuit was not installed on my 9S12A256 bread board. When I switch to use the external clock, it worked fine. Wayne --- "varneybob <>" <> wrote: > I'm using CodeWarrior for HC(S)12. We've been using > an eval board > with the MC9S12DP256B MCU, but are actual MCU is the > MC9S12A256B. I > cannot get CodeWarrior to talk to the MCU via the > P&E BDM Multilink > cable. Also CodeWarrior, does not list the > MC9S12A256B in a MCU-ID > drop-down list (it _does_ list the MC9S12DP256B). > > Any help would be appreciated! __________________________________________________ |
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - zathra_70 - Jan 22 20:45:00 2003
|
varneybob, If you are still on the base V1.2 install, you need to upgrade a bunch of files (headers, P&E driver, more) - contact metrowerks. I went through the same thing on an A series part. They just aren't supported in off the 1.2 CD install. -zathra_70 --- In , "varneybob <varneybob@y...>" <varneybob@y...> wrote: > I'm using CodeWarrior for HC(S)12. We've been using an eval board > with the MC9S12DP256B MCU, but are actual MCU is the MC9S12A256B. I > cannot get CodeWarrior to talk to the MCU via the P&E BDM Multilink > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU-ID > drop-down list (it _does_ list the MC9S12DP256B). > > Any help would be appreciated! |
|
|
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Bob Kohan - Jan 23 7:48:00 2003
|
Access to these update files would be much appreciated. B.K. >>> 01/22/03 07:45PM >>> varneybob, If you are still on the base V1.2 install, you need to upgrade a bunch of files (headers, P&E driver, more) - contact metrowerks. I went through the same thing on an A series part. They just aren't supported in off the 1.2 CD install. -zathra_70 --- In , "varneybob <varneybob@y...>" <varneybob@y...> wrote: > I'm using CodeWarrior for HC(S)12. We've been using an eval board > with the MC9S12DP256B MCU, but are actual MCU is the MC9S12A256B. I > cannot get CodeWarrior to talk to the MCU via the P&E BDM Multilink > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU-ID > drop-down list (it _does_ list the MC9S12DP256B). > > Any help would be appreciated! -------------------------------------------------------- To unsubscribe from this group, send an email to: To learn more about Motorola Microcontrollers, please visit http://www.motorola.com/mcu ************************************************************************* IMPORTANT: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information contained in this e-mail message that do not relate to the official business of Life Fitness shall be understood as neither given nor endorsed by it. ************************************************************************* [Non-text portions of this message have been removed] |
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - varneybob - Jan 23 8:13:00 2003
|
I've emailed Metrowerks but have not heard back yet. Is there any way you can post all the necessary files somewhere? --- In , "zathra_70 <zathra_70@y...>" <zathra_70@y...> wrote: > varneybob, > > If you are still on the base V1.2 install, you need to upgrade a bunch > of files (headers, P&E driver, more) - contact metrowerks. > I went through the same thing on an A series part. They just aren't > supported in off the 1.2 CD install. > > -zathra_70 > > --- In , "varneybob <varneybob@y...>" > <varneybob@y...> wrote: > > I'm using CodeWarrior for HC(S)12. We've been using an eval board > > with the MC9S12DP256B MCU, but are actual MCU is the MC9S12A256B. I > > cannot get CodeWarrior to talk to the MCU via the P&E BDM Multilink > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- ID > > drop-down list (it _does_ list the MC9S12DP256B). > > > > Any help would be appreciated! |
|
|
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - varneybob - Jan 23 9:13:00 2003
|
Actually I just programmed the MC9S12A256B part with the MC9S12DP256B settings from CodeWarrior V1.2! We found out that the MCU was being held in reset because of a fault on our text fixture. Everything is going smooth for the moment. And as a side note, the Metrowerks website has a little blurb that CodeWarrior 2.0 for HC(S)12 is available for download, but darn if I could find it anywhere. Thanks. --- In , "varneybob <varneybob@y...>" <varneybob@y...> wrote: > I've emailed Metrowerks but have not heard back yet. Is there any > way you can post all the necessary files somewhere? > > --- In , "zathra_70 <zathra_70@y...>" > <zathra_70@y...> wrote: > > varneybob, > > > > If you are still on the base V1.2 install, you need to upgrade a > bunch > > of files (headers, P&E driver, more) - contact metrowerks. > > I went through the same thing on an A series part. They just aren't > > supported in off the 1.2 CD install. > > > > -zathra_70 > > > > --- In , "varneybob <varneybob@y...>" > > <varneybob@y...> wrote: > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > board > > > with the MC9S12DP256B MCU, but are actual MCU is the > MC9S12A256B. I > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > Multilink > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > ID > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > Any help would be appreciated! |
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Erich Styger - Jan 23 9:54:00 2003
|
ftp.metrowerks.com/pub/embedded/HC12/CW12_V2_0.exe But this is the full installation: 134MB Erich > -----Original Message----- > From: varneybob <> [mailto:] > Sent: Donnerstag, 23. Januar 2003 14:14 > To: > Subject: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > I've emailed Metrowerks but have not heard back yet. Is there any > way you can post all the necessary files somewhere? > > --- In , "zathra_70 <zathra_70@y...>" > <zathra_70@y...> wrote: > > varneybob, > > > > If you are still on the base V1.2 install, you need to upgrade a > bunch > > of files (headers, P&E driver, more) - contact metrowerks. > > I went through the same thing on an A series part. They just aren't > > supported in off the 1.2 CD install. > > > > -zathra_70 > > > > --- In , "varneybob <varneybob@y...>" > > <varneybob@y...> wrote: > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > board > > > with the MC9S12DP256B MCU, but are actual MCU is the > MC9S12A256B. I > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > Multilink > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > ID > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > Any help would be appreciated! > -------------------------------------------------------- > To unsubscribe from this group, send an email to: > To learn more about Motorola Microcontrollers, please visit > http://www.motorola.com/mcu |
|
|
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Ed Carryer - Jan 23 13:12:00 2003
|
Erich, I first got an error on transfer now a file not found error while trying to download the update. Is it still available? thanks ed -- At 03:54 PM 1/23/2003 +0100, you wrote: >ftp.metrowerks.com/pub/embedded/HC12/CW12_V2_0.exe >But this is the full installation: 134MB > >Erich > > > -----Original Message----- > > From: varneybob <> [mailto:] > > Sent: Donnerstag, 23. Januar 2003 14:14 > > To: > > Subject: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > > > > > > I've emailed Metrowerks but have not heard back yet. Is there any > > way you can post all the necessary files somewhere? > > > > --- In , "zathra_70 <zathra_70@y...>" > > <zathra_70@y...> wrote: > > > varneybob, > > > > > > If you are still on the base V1.2 install, you need to upgrade a > > bunch > > > of files (headers, P&E driver, more) - contact metrowerks. > > > I went through the same thing on an A series part. They just aren't > > > supported in off the 1.2 CD install. > > > > > > -zathra_70 > > > > > > --- In , "varneybob <varneybob@y...>" > > > <varneybob@y...> wrote: > > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > > board > > > > with the MC9S12DP256B MCU, but are actual MCU is the > > MC9S12A256B. I > > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > > Multilink > > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > > ID > > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > > > Any help would be appreciated! > > > > > > -------------------------------------------------------- > > To unsubscribe from this group, send an email to: > > > > > > To learn more about Motorola Microcontrollers, please visit > > http://www.motorola.com/mcu > > > > > > > > > > > > >-------------------------------------------------------- >To unsubscribe from this group, send an email to: >To learn more about Motorola Microcontrollers, please visit >http://www.motorola.com/mcu |
|
|
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Erich Styger - Jan 23 14:22:00 2003
|
Hmm, seems that the web team is moving files around :-( Let me check. Erich > -----Original Message----- > From: Ed Carryer [mailto:] > Sent: Donnerstag, 23. Januar 2003 19:12 > To: > Subject: RE: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > Erich, > I first got an error on transfer now a file not found error while > trying to download the update. > > Is it still available? > > thanks > ed > -- > At 03:54 PM 1/23/2003 +0100, you wrote: > >ftp.metrowerks.com/pub/embedded/HC12/CW12_V2_0.exe > >But this is the full installation: 134MB > > > >Erich > > > > > -----Original Message----- > > > From: varneybob <> [mailto:] > > > Sent: Donnerstag, 23. Januar 2003 14:14 > > > To: > > > Subject: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > > > > > > > > > I've emailed Metrowerks but have not heard back yet. Is there any > > > way you can post all the necessary files somewhere? > > > > > > --- In , "zathra_70 <zathra_70@y...>" > > > <zathra_70@y...> wrote: > > > > varneybob, > > > > > > > > If you are still on the base V1.2 install, you need to upgrade a > > > bunch > > > > of files (headers, P&E driver, more) - contact metrowerks. > > > > I went through the same thing on an A series part. They just aren't > > > > supported in off the 1.2 CD install. > > > > > > > > -zathra_70 > > > > > > > > --- In , "varneybob <varneybob@y...>" > > > > <varneybob@y...> wrote: > > > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > > > board > > > > > with the MC9S12DP256B MCU, but are actual MCU is the > > > MC9S12A256B. I > > > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > > > Multilink > > > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > > > ID > > > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > > > > > Any help would be appreciated! > > > > > > > > > -------------------------------------------------------- > > > To unsubscribe from this group, send an email to: > > > > > > > > > To learn more about Motorola Microcontrollers, please visit > > > http://www.motorola.com/mcu > > > > > > > > > > > > > > > >-------------------------------------------------------- >To unsubscribe from this group, send an email to: >To learn more about Motorola Microcontrollers, please visit >http://www.motorola.com/mcu -------------------------------------------------------- To unsubscribe from this group, send an email to: To learn more about Motorola Microcontrollers, please visit http://www.motorola.com/mcu |
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Erich Styger - Jan 24 3:30:00 2003
|
http://www.metrowerks.com/MW/Develop/Embedded/HC12/Default.htm download link on the right side. Or: http://www.metrowerks.com/mw/download/default.htm?did=find&vers=CWHC12&submi t=Find Erich > -----Original Message----- > From: Ed Carryer [mailto:] > Sent: Donnerstag, 23. Januar 2003 19:12 > To: > Subject: RE: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > Erich, > I first got an error on transfer now a file not found error while > trying to download the update. > > Is it still available? > > thanks > ed > -- > At 03:54 PM 1/23/2003 +0100, you wrote: > >ftp.metrowerks.com/pub/embedded/HC12/CW12_V2_0.exe > >But this is the full installation: 134MB > > > >Erich > > > > > -----Original Message----- > > > From: varneybob <> [mailto:] > > > Sent: Donnerstag, 23. Januar 2003 14:14 > > > To: > > > Subject: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > > > > > > > > > I've emailed Metrowerks but have not heard back yet. Is there any > > > way you can post all the necessary files somewhere? > > > > > > --- In , "zathra_70 <zathra_70@y...>" > > > <zathra_70@y...> wrote: > > > > varneybob, > > > > > > > > If you are still on the base V1.2 install, you need to upgrade a > > > bunch > > > > of files (headers, P&E driver, more) - contact metrowerks. > > > > I went through the same thing on an A series part. They just aren't > > > > supported in off the 1.2 CD install. > > > > > > > > -zathra_70 > > > > > > > > --- In , "varneybob <varneybob@y...>" > > > > <varneybob@y...> wrote: > > > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > > > board > > > > > with the MC9S12DP256B MCU, but are actual MCU is the > > > MC9S12A256B. I > > > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > > > Multilink > > > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > > > ID > > > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > > > > > Any help would be appreciated! > > > > > > > > > -------------------------------------------------------- > > > To unsubscribe from this group, send an email to: > > > > > > > > > To learn more about Motorola Microcontrollers, please visit > > > http://www.motorola.com/mcu > > > > > > > > > > > > > > > >-------------------------------------------------------- >To unsubscribe from this group, send an email to: >To learn more about Motorola Microcontrollers, please visit >http://www.motorola.com/mcu -------------------------------------------------------- To unsubscribe from this group, send an email to: To learn more about Motorola Microcontrollers, please visit http://www.motorola.com/mcu |
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )
RE: Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) - Bob Kohan - Jan 24 7:20:00 2003
|
Is 2.0 an upgrade to 1.2? Do I have to uninstall 1.2 before installing 2.0? Thanks, B.K. >>> 01/23/03 01:22PM >>> Hmm, seems that the web team is moving files around :-( Let me check. Erich > -----Original Message----- > From: Ed Carryer [mailto:] > Sent: Donnerstag, 23. Januar 2003 19:12 > To: > Subject: RE: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > Erich, > I first got an error on transfer now a file not found error while > trying to download the update. > > Is it still available? > > thanks > ed > -- > At 03:54 PM 1/23/2003 +0100, you wrote: > >ftp.metrowerks.com/pub/embedded/HC12/CW12_V2_0.exe > >But this is the full installation: 134MB > > > >Erich > > > > > -----Original Message----- > > > From: varneybob <> [mailto:] > > > Sent: Donnerstag, 23. Januar 2003 14:14 > > > To: > > > Subject: [68HC12] Re: MC9S12A256B vs MC9S12DP256B (and CodeWarrior) > > > > > > > > > I've emailed Metrowerks but have not heard back yet. Is there any > > > way you can post all the necessary files somewhere? > > > > > > --- In , "zathra_70 <zathra_70@y...>" > > > <zathra_70@y...> wrote: > > > > varneybob, > > > > > > > > If you are still on the base V1.2 install, you need to upgrade a > > > bunch > > > > of files (headers, P&E driver, more) - contact metrowerks. > > > > I went through the same thing on an A series part. They just aren't > > > > supported in off the 1.2 CD install. > > > > > > > > -zathra_70 > > > > > > > > --- In , "varneybob <varneybob@y...>" > > > > <varneybob@y...> wrote: > > > > > I'm using CodeWarrior for HC(S)12. We've been using an eval > > > board > > > > > with the MC9S12DP256B MCU, but are actual MCU is the > > > MC9S12A256B. I > > > > > cannot get CodeWarrior to talk to the MCU via the P&E BDM > > > Multilink > > > > > cable. Also CodeWarrior, does not list the MC9S12A256B in a MCU- > > > ID > > > > > drop-down list (it _does_ list the MC9S12DP256B). > > > > > > > > > > Any help would be appreciated! > > > > > > > > > -------------------------------------------------------- > > > To unsubscribe from this group, send an email to: > > > > > > > > > To learn more about Motorola Microcontrollers, please visit > > > http://www.motorola.com/mcu > > > > > > > > > > > > > > > >-------------------------------------------------------- >To unsubscribe from this group, send an email to: >To learn more about Motorola Microcontrollers, please visit >http://www.motorola.com/mcu -------------------------------------------------------- To unsubscribe from this group, send an email to: To learn more about Motorola Microcontrollers, please visit http://www.motorola.com/mcu -------------------------------------------------------- To unsubscribe from this group, send an email to: To learn more about Motorola Microcontrollers, please visit http://www.motorola.com/mcu ************************************************************************* IMPORTANT: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information contained in this e-mail message that do not relate to the official business of Life Fitness shall be understood as neither given nor endorsed by it. ************************************************************************* [Non-text portions of this message have been removed] |
|
|
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )