Sign in

username:

password:



Not a member?

Search 68hc12



Search tips

Subscribe to 68hc12



68hc12 by Keywords

68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC

Ads

Discussion Groups

See Also

DSPFPGAElectronics

Discussion Groups | 68HC12 | *****NEVYZIADANA POSTA***** Re: Codewarrior and Motorola SDI, BDM port

Join our technical discussions about Freescale Microcontrollers: M68HC12. (Freescale Semiconductor is a Subsidiary of Motorola).

*****NEVYZIADANA POSTA***** Re: Codewarrior and Motorola SDI, BDM port - VT - Mar 12 7:52:00 2004

Spam detection software, running on the system "fw2.vse.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or block
similar future email. If you have any questions, see
postmaster for details.

Content preview: Hi Cosmin, It's great u also experienced this. Could u
tell me abit more how u overcomed this? What do u mean by saying Buy a
BDM? Look forward to ur reply, Tuan, --- In ,
"Cosmin Giurgiu" <cosmingiurgiu@h...> wrote: > Hello, > I have the same
problem with M68HC912C32EVB.. Buy a BDM ... > Regards > cosming > >
----- Original Message ----- > From: a2vutuan > To:
> Sent: Wednesday, February 11, 2004 6:49 PM >
Subject: [68HC12] Codewarrior and Motorola SDI, BDM port > > > Hi, >
I'm using M68HC912B32EVB. I've been trying to use Motorola SDI as an >
interface between my EVB and Codewarrior. But the Codewarrior >
Dubugger can't detect my EVB. It keeps on saying that "Target not >
ready or not connected on COM2" when I do "Set Target". > My connection
is like this: > [COM2 of PC] -> SDI -> [BDM port of EVB]. > I also
installed a jumper on the pin 3,4 of J51 of the SDI as > instructed in
the manual, this is to use standard supply for the > SDI. And mine is
Codewarrior Studio Special Edition only. > I've seen that lots of
people can use BDM port, hopefully you can > have me out of this.
Thanks alot. > VT > [...]

Content analysis details: (8.6 points, 5.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org
[155.69.5.222 listed in opm.blitzed.org]
4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy
[155.69.5.222 listed in opm.blitzed.org]

Tato posta je pravdepodobne nevyziadana. Povodna sprava bola umiestnena
do prilohy, aby ste mohli podobnu postu v buducnosti bezpecne rozpoznat.
Ak chcete, aby tato posta bola automaticky mazana, nastavte si pravidla
na postovom servri (navod najdete na
http://vsedw.inet.vse.sk/dokumenty/rozne/help/antispam/antispam.htm )
UPOZORNENIE: nezverejnujte svoju e-mail adresu na internete

this group, send an email to: [...]

Detaily vysledkov analyzy: (8.6 points, 5.0 required)
4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org
[155.69.5.222 listed in opm.blitzed.org]
4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy
[155.69.5.222 listed in opm.blitzed.org]

[Non-text portions of this message have been removed]




(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )