Sign in
Search AT91SAM
Subscribe to AT91SAM
Ads
Discussion Groups
AT91SAM ARM
For users of the Atmel AT91SAM7 and AT91SAM9 ARM CPU chips. Atmel has taken a new direction by combining on chip flash and ram with the ARM CPU on a single die. This provides low cost devices for small systems using the ARM CPU. This group is to exchange information to help users get started and learn how to use the devices.
AT91SAMS16
thomasschulte - Dec 8 2007
Hello Friends!
Any news whre/when to get the new
AT91SAMS16 ?
Regards
T.
... 
Selecting the clock source.
andnan - Dec 8 2007
I'm using the AT91SAM7SE512.
My application requires the device to be used in the field from
battery power. I'd like to keep the power to a minimum to increase
battery life... Processor wakeup time from processor idle mode
andnan - Dec 7 2007
I want to reduce my power consumption to a minimum. If I put the
processor into idle mode, but leave the MCK chugging away, interrupts
will still happen at the MCK frequency c... Re: Processor wakeup time from processor idle mode
bernd schuster - Dec 7 2007
2007/12/7, andnan :
>
> I want to reduce my power consumption to a minimum. If I put the
> processor into idle mode, but leave the MCK chugging away, interrupts
> will ... SRAM for ARM7 [2 Articles]
andnan - Dec 6 2007
My project requires some additional ram. Due to the power constraints
of a battery powered applcation, I need low power SRAM.
I'm planning on using the CY62128EV30 (TSOP) p... Simran..
simran singh - Dec 6 2007
Hi all,
I am simran from India.. want to learn ARM...
Interested in Philips and Atmel ARM...
I hope all the people may help me in learning...
Regard... Re: Apology for spam being posted
Stefan Wimmer - Dec 6 2007
--- In A...@yahoogroups.com, "at91sam_owner"
wrote:
>
> As owner of this group, I make it a primary objective to make the
group
> as user friendly as possible. ...
... AT91SAM7A3 weird behavior of SPI peripheral [4 Articles]
Cho - Dec 5 2007
Recently I have been working on SPI interface on AT91SAM7A3, and I
found out an weird behavior. Although I already have the workaround
but I just want to share this with people ... Re: you + mentor = online success
Mark Bayern - Dec 2 2007
and I'm moderated???
On Dec 2, 2007 2:43 PM, memFirst Name M wrote:
>
> You won't ever be successful unless
> you have a MENTOR to look out for you,
...[SPAM CLIPPE... AT91SAM7X-EK -- getting started [6 Articles]
mlb_and_mlb - Dec 1 2007
I'm trying to get started with the ATA91SAM7X-EK and having problems
getting SAM_BA to see the board.
Plugging the USB connector between my PC and the board causes the PC
to n...