Sign in
Search AT91SAM
Subscribe to AT91SAM
Ads
Discussion Groups
See Also
Discussion Groups | AT91SAM ARM | AT91SAM9263 nor flash boot problem
For users of the Atmel AT91SAM7 and AT91SAM9 ARM CPU chips. Atmel has taken a new direction by combining on chip flash and ram with the ARM CPU on a single die. This provides low cost devices for small systems using the ARM CPU. This group is to exchange information to help users get started and learn how to use the devices.
AT91SAM9263 nor flash boot problem - bernd schuster - Apr 7 11:05:47 2009
Hi,
could someone provide me a working example for this controller (starting a
programm from a external nor flash device? At the moment, I`ve a few
problems with the PLL settings. The configuration registern for the PLL are
correct (if I start the programm from the external SDRAM, everything is
working), but there must be another trick or any special operation....
best regards
Bernd
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
could someone provide me a working example for this controller (starting a
programm from a external nor flash device? At the moment, I`ve a few
problems with the PLL settings. The configuration registern for the PLL are
correct (if I start the programm from the external SDRAM, everything is
working), but there must be another trick or any special operation....
best regards
Bernd
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )