Sign in
Search LPC900_users
Subscribe to LPC900_users
Ads
Discussion Groups
Discussion Groups | LPC900 | RE: Digest Number 16
Find help, specifications and source code for the LPC900. The LPC900 challenges Microchip and AVR based on the worlds most popular 8-bit architecture the 80C51. With a 2-clock core the LPC900 series is a high performance, very flexible and low cost 8-bit microcontroller family. Designers using or interested in these devices are encouraged to share their know-how and ask questions.
RE: Digest Number 16 - Hitesh Mahant - Oct 9 22:49:00 2004
Hi all,
As I wanted to try LPCxxx, for some simple applications. I enquired for
MCB900EB. I got offer for INR.6500/- (almost U$150.00) for such a small
board.
So I decised to make one on my own, and successfully made one. It works
with RESET pulse method. As ISP method is used by only LPC932, and most
of them use ICP; I am trying to implement ICP also on that.
Regards,
Hitesh Mahant
www.vital4all.com
-----Original Message-----
From: lpc900_users@lpc9... [mailto:lpc900_users@lpc9...]
Sent: Saturday, October 09, 2004 10:05 PM
To: lpc900_users@lpc9...
Subject: [lpc900_users] Digest Number 16
There is 1 message in this issue.
Topics in this digest:
1. mcb900 and Linux
From: Ian bell <ianbell@ianb... ________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Sat, 09 Oct 2004 15:09:47 +0100
From: Ian bell <ianbell@ianb...>
Subject: mcb900 and Linux
Anyone had any luck getting the mcb900 evaluation board to work under
Linux?
Ian
--
Ian T-Bell
aka RuffRecords
aka RedTommo ________________________________________________________________________
________________________________________________________________________
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
As I wanted to try LPCxxx, for some simple applications. I enquired for
MCB900EB. I got offer for INR.6500/- (almost U$150.00) for such a small
board.
So I decised to make one on my own, and successfully made one. It works
with RESET pulse method. As ISP method is used by only LPC932, and most
of them use ICP; I am trying to implement ICP also on that.
Regards,
Hitesh Mahant
www.vital4all.com
-----Original Message-----
From: lpc900_users@lpc9... [mailto:lpc900_users@lpc9...]
Sent: Saturday, October 09, 2004 10:05 PM
To: lpc900_users@lpc9...
Subject: [lpc900_users] Digest Number 16
There is 1 message in this issue.
Topics in this digest:
1. mcb900 and Linux
From: Ian bell <ianbell@ianb... ________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Sat, 09 Oct 2004 15:09:47 +0100
From: Ian bell <ianbell@ianb...>
Subject: mcb900 and Linux
Anyone had any luck getting the mcb900 evaluation board to work under
Linux?
Ian
--
Ian T-Bell
aka RuffRecords
aka RedTommo ________________________________________________________________________
________________________________________________________________________
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
Re: Digest Number 16 - lpc2100_fan - Oct 11 0:52:00 2004
Hello Hitesh,
I don't know who offered the MCB900 @ almost $150 to you because it is
listed for $59 from Philips, Keil and www.lpctools.com
So, congratulations to a functional board.
Cheers Bob
--- In lpc900_users@lpc9..., "Hitesh Mahant" <vital98@i...> wrote:
> Hi all,
>
> As I wanted to try LPCxxx, for some simple applications. I enquired for
> MCB900EB. I got offer for INR.6500/- (almost U$150.00) for such a small
> board.
>
> So I decised to make one on my own, and successfully made one. It works
> with RESET pulse method. As ISP method is used by only LPC932, and most
> of them use ICP; I am trying to implement ICP also on that.
>
> Regards,
> Hitesh Mahant
> www.vital4all.com >
> -----Original Message-----
> From: lpc900_users@lpc9... [mailto:lpc900_users@lpc9...]
>
> Sent: Saturday, October 09, 2004 10:05 PM
> To: lpc900_users@lpc9...
> Subject: [lpc900_users] Digest Number 16 >
>
> There is 1 message in this issue.
>
> Topics in this digest:
>
> 1. mcb900 and Linux
> From: Ian bell <ianbell@u... > ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 1
> Date: Sat, 09 Oct 2004 15:09:47 +0100
> From: Ian bell <ianbell@u...>
> Subject: mcb900 and Linux
>
> Anyone had any luck getting the mcb900 evaluation board to work under
> Linux?
>
> Ian
>
> --
> Ian T-Bell
> aka RuffRecords
> aka RedTommo > ________________________________________________________________________
> ________________________________________________________________________ >
> ------------------------------------------------------------------------
> Yahoo! Groups Links >
>
> ------------------------------------------------------------------------
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
Re: Digest Number 16 - Fausto Marzoli - Oct 11 3:09:00 2004
Alle 04:49, domenica 10 ottobre 2004, Hitesh Mahant ha scritto:
> So I decised to make one on my own, and successfully made one. It works
> with RESET pulse method. As ISP method is used by only LPC932, and most
> of them use ICP; I am trying to implement ICP also on that.
I've implemented the ICP programming on LPC9xx family: I've developed a
"LPC9xx Programmer" using ICP.
Philips do not provide the ICP specifications on the philips web site, but
I've found them here:
http://www.promax.no/download/data/Semi/Philips/Micro_controller/lpc90x/
There is the original philips ISP to ICP bridge source code, too!
Fausto
--
Fausto Marzoli - 8052.it - http://www.8052.it/
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
> So I decised to make one on my own, and successfully made one. It works
> with RESET pulse method. As ISP method is used by only LPC932, and most
> of them use ICP; I am trying to implement ICP also on that.
I've implemented the ICP programming on LPC9xx family: I've developed a
"LPC9xx Programmer" using ICP.
Philips do not provide the ICP specifications on the philips web site, but
I've found them here:
http://www.promax.no/download/data/Semi/Philips/Micro_controller/lpc90x/
There is the original philips ISP to ICP bridge source code, too!
Fausto
--
Fausto Marzoli - 8052.it - http://www.8052.it/
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
Re: Digest Number 16 - Hitesh Mahant - Oct 11 21:22:00 2004
Thanks Fausto,
I havedownloaded your recoms. I will go through very soon, but I am sure
it will be useful. Because NET help groups havenever disappointed me.
Techies on net are always helpful to each other.
Thanks again.
Bob, at present it’s a crude board which can only 'program' an LPC932
but on target board.
Regards,
Hitesh Mahant
www.vital4all.com
Message: 3
Date: Mon, 11 Oct 2004 09:09:26 +0200
From: Fausto Marzoli <faumarz@faum...>
Subject: Re: Digest Number 16
Alle 04:49, domenica 10 ottobre 2004, Hitesh Mahant ha scritto:
> So I decised to make one on my own, and successfully made one. It
> works with RESET pulse method. As ISP method is used by only LPC932,
> and most of them use ICP; I am trying to implement ICP also on that.
I've implemented the ICP programming on LPC9xx family: I've developed a
"LPC9xx Programmer" using ICP.
Philips do not provide the ICP specifications on the philips web site,
but
I've found them here:
http://www.promax.no/download/data/Semi/Philips/Micro_controller/lpc90x/
There is the original philips ISP to ICP bridge source code, too!
Fausto
--
Fausto Marzoli - 8052.it - http://www.8052.it/
________________________________________________________________________
________________________________________________________________________
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
I havedownloaded your recoms. I will go through very soon, but I am sure
it will be useful. Because NET help groups havenever disappointed me.
Techies on net are always helpful to each other.
Thanks again.
Bob, at present it’s a crude board which can only 'program' an LPC932
but on target board.
Regards,
Hitesh Mahant
www.vital4all.com
Message: 3
Date: Mon, 11 Oct 2004 09:09:26 +0200
From: Fausto Marzoli <faumarz@faum...>
Subject: Re: Digest Number 16
Alle 04:49, domenica 10 ottobre 2004, Hitesh Mahant ha scritto:
> So I decised to make one on my own, and successfully made one. It
> works with RESET pulse method. As ISP method is used by only LPC932,
> and most of them use ICP; I am trying to implement ICP also on that.
I've implemented the ICP programming on LPC9xx family: I've developed a
"LPC9xx Programmer" using ICP.
Philips do not provide the ICP specifications on the philips web site,
but
I've found them here:
http://www.promax.no/download/data/Semi/Philips/Micro_controller/lpc90x/
There is the original philips ISP to ICP bridge source code, too!
Fausto
--
Fausto Marzoli - 8052.it - http://www.8052.it/
________________________________________________________________________
________________________________________________________________________
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )