Sign in
Search LPC900_users
Subscribe to LPC900_users
Ads
Discussion Groups
Discussion Groups | LPC900 | Re: LPC936 with external crystal
Find help, specifications and source code for the LPC900. The LPC900 challenges Microchip and AVR based on the worlds most popular 8-bit architecture the 80C51. With a 2-clock core the LPC900 series is a high performance, very flexible and low cost 8-bit microcontroller family. Designers using or interested in these devices are encouraged to share their know-how and ask questions.
Re: LPC936 with external crystal - Nilesh - Jul 7 6:10:22 2008
Do not use AUXR1.... cuase it will not help i think... also check the errata sheet of
Micocontroller..
Regards,
Nilesh (09925049517)
Potent embedded solutions
"Sai Krupa"
B/H Vaghasi Building,
Amul dairy road,
Anand - 388001
Gujarat , India.
--- On Mon, 7/7/08, vijay.satra wrote:
From: vijay.satra
Subject: [lpc900_users] LPC936 with external crystal
To: l...@yahoogroups.com
Date: Monday, 7 July, 2008, 12:11 PM
i want accurate timing so i used external crystal of 8MHZ with
LPC936 but i found the following problems.
1.With crystal (8MHZ) & its capacitor value 33pf or 22pf the LPC936,
the unit gets hang while contactor switching or any kind of noise
occurs at supply terminals.
2.The unit works ok after the capacitor is removed but some time
controller does not startup properly.
3.The unit works fine if internal on-chip oscillator is used.
Configuration byte
P0M1 = 0xf4;
P0M2 = 0xb;
P1M1 = 0x2e;
P1M2 = 0x9e;
P2M1 = 0;
P2M2 = 0x81;
DIVM = 0x1;
TRIM &= ~0x40;
AUXR1 |= 0x80;
Kindly suggest some method to solve the problem.
Did you know? You can CHAT without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php/
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )
Regards,
Nilesh (09925049517)
Potent embedded solutions
"Sai Krupa"
B/H Vaghasi Building,
Amul dairy road,
Anand - 388001
Gujarat , India.
--- On Mon, 7/7/08, vijay.satra
From: vijay.satra
Subject: [lpc900_users] LPC936 with external crystal
To: l...@yahoogroups.com
Date: Monday, 7 July, 2008, 12:11 PM
i want accurate timing so i used external crystal of 8MHZ with
LPC936 but i found the following problems.
1.With crystal (8MHZ) & its capacitor value 33pf or 22pf the LPC936,
the unit gets hang while contactor switching or any kind of noise
occurs at supply terminals.
2.The unit works ok after the capacitor is removed but some time
controller does not startup properly.
3.The unit works fine if internal on-chip oscillator is used.
Configuration byte
P0M1 = 0xf4;
P0M2 = 0xb;
P1M1 = 0x2e;
P1M2 = 0x9e;
P2M1 = 0;
P2M2 = 0x81;
DIVM = 0x1;
TRIM &= ~0x40;
AUXR1 |= 0x80;
Kindly suggest some method to solve the problem.
Did you know? You can CHAT without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php/
(You need to be a member of LPC900_users -- send a blank email to LPC900_users-subscribe@yahoogroups.com )