Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

RE: Mircocontroller Starter Kit

You can also have a look at Prof. Peter Andersons website - http://www.phanderson.com/basicx/index.html, there are many examples, you can buy all your supplies and learn how to s...

Re: 12v electrical systems   [2 Articles]

Food for thought: A 12v generator has trouble keeping up with headlights and windscreen wipers and is closer to 12v than a modern alternator. Recently I purchased a hunting 12v...

Re: Kalman Filter Code   [4 Articles]

Im really struggling to get this to work with ADC accel unit (im using 5dof board from sparkfun). Anyone sucessfully got this working using ADC gyros and accellerometers rathe...

Custom UART   [5 Articles]

I am trying to communicate with a monitoring system that apparently is using the following communications protocol (per O-scope). 1 Start Bit 32 Data Bits 2 Stop Bits ~180,00...

What did I do?   [6 Articles]

I have a bx-24 in the development board. I downloaded a short program that used com1 at 2400 baud. It worked at first. Now all I get is a sequence of non-ascii characters in th...

Re: Saving posts   [2 Articles]

--- In b...@yahoogroups.com, Tom Becker wrote: > > > ... Does anybody know how (if possible) to save all the posts here to > a harddrive for reference when the interne...

Re: Multi-Master SPI Arbitration

Some food for thought: http://www.idt.com/products/files/4579345/71342_AN_13145.pdf?CFID=6561006&CFTOKEN=72732795 http://chinese-school.netfirms.com/forums/multiprocessor-semap...

Re: SPI or Serial with BX-24 as slave device   [3 Articles]

Thanks for all your help, Tom. This is looking promising. At least I'm getting more meaningful data from the mite. How does 65 relate to A? If string works, shouldn't numbers?...

Intercept LCD Writes   [2 Articles]

I am trying to capture data from a handheld device that has a proprietary processor that is writing to a Hitachi HD61603 LCD driver. I need to read the bit streams from 4 data...

COM3 Voltage 5V to 3V   [2 Articles]

I have configured 2 pins for com3 to communicate with a Siemens C35 using its RX,TX pins so far so good i can communicate with the cellphone, but in order to the cellphone don't lo...