Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

Problem With ADC Converters

Hey, I'm having a problem with ADC on pins 13, 19, and 20. When connected to something they yield an output of around 900-910, and when allowed to float they output 1024. The ...

dc motor control   [4 Articles]

hi, I am wondering how to control 4 DC motors without buying an expensive motor controller. I need speed control, and direction. Thanks, Andy [Non-text por...

SitePlayer to BX-24 connection   [3 Articles]

I'm looking for information and guidance on using the original SitePlayer as the network front end for a BX-24. I would like to include remote reprogramming of both modules once...

Whoa! freaky-ass glitch in bx24   [5 Articles]

OK folks this is really wierd. my program is doing something that i totally can't figure out. here's the code. note that i have a routine that flashes the red and green 6 tim...

PID Question   [11 Articles]

I am in the mechanical field (I took a systems and controls class about 4 years ago) however I do dabble in quite a bit of electronics (BX24 related) on the side. A project ...

Re: Parallax/Hitachi HM55B Compass Example   [16 Articles]

--- In b...@yahoogroups.com, "tombhandley" wrote: > > I've posted a Parallax/Hitachi HM55B Compass module with a test > example, calibration routine, and instructions on ...

Bx-24 to eb505   [4 Articles]

Hello, I'm working on a project to connect the BasicX-24 to an eb505 Bluetooth transceiver from A7 Engineering. I am trying to issue a "connect to the MAC address of another...

Newbie Questions for the BX-35   [2 Articles]

I am considering using a BX-35 for a project and I have a few questions. First, from posts in this newgroups, it looks like to use more than 2 UART's you simply share COM3 bet...

question about the use of com3

I have 3 sources/destinations using serial I/O So I have defined 3 different I/O queues. Is there anything I have to do when switching the com3 port to a different queue? D...

MUX   [5 Articles]

Hello I need to multiplex one of the ADC pins of BasicX in order to receive signals from 4 analog devices...(Of course using 2 digital pins for address purposes) Can anyone s...