Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

ADXL IC availibility   [6 Articles]

I have been working with the ADXL202 acelerometer for a while and finally seemed to have tamed it to my satisfaction. I have been using the ADXL202EB for my experim...

ADXL Accelerometer Question

I have an ADXL202 accelerometer attached to my BX24. I have things working fairly well. The ADXL is being used as a tiltmeter. When I place it level (x-axis perpind...

ADXL 202 Socket

Any one knows of a source for the LCC 8 pin socket for that chip ? Thanks, Raphi Houri ...

RE: Analog reading of adxl202   [4 Articles]

Dan, I want to read the analog output not the PWM output. I had checked the BX24 folder app notes but it only address the PWM that I could tell. The BX01 folder h...

problem with ADXL202

I'm having trouble getting DisplayAcceleration from the BasicX web site to work. I connected ground to pin 4, +5v to 13 and 14, and pins 8 and 9 of the ADXL to pi...

Re: adxl202 - improving reading rate   [2 Articles]

Hi, Try using the analog output from the ADXL, and the BX-24's ADC, that way you can get many more readings per second if that is what you need. I've used it w...

ADXL202 Information

I would like to put together a package dealing with any information having to do with the ADXK202. If you have any code or written information gleaned from your exp...

Precision power supply   [6 Articles]

I read an interesting post on one of these maillists concerning the accuracy of the ADXL202 measurements being effected by the stability of the voltage supplied to ...

About this Rocket Acceleration ...   [3 Articles]

Thanks to all you guys who have been coming forth with help and ideas for my project! The current use for the ADXL is to tell the BasicX when the liftoff of ...

Re: gyroscope

If you are talking about the kind of gyro that goes into a model helicopter - then you need to send it a 1.5 ms pulse train as a reference signal. The output of the...

Re: bx-24 & UAV?

I don't see why this couldn't work, although I don't know of anyone doing it with the BX24. You should really ask about this on the basicstamps egroups list, at ...

Re: measuring tilt and direction changes?

Three accelerometers, each mounted perpendicular to one another, will give you title, direction, and acceleration information. (Our inner ear uses the exact same sc...

Re: Gyro'd platform

Hi Tom, The ADXL311 will output 2.5 volts (assuming 5.0 volt supply, make sure your supply is as clean as possible - a series resistor of 100 ohms in the supply ...

Program problem

I have found a strange problem that I hope that someone in this group can explain to me. Below is a program 'adxlcalibrate.bas' and its map file from the last compile. ...