Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

Newbie Questioin about Serial I/O   [4 Articles]

Hi I just bought a BasicX-24 to replace the BasicStamp on my HexCrawler Robot (www.crustcrawler.com). Now i realised that i cannot use every I/O Pin as a RS...

Re: UNCLE, UNCLE I give up.....   [2 Articles]

Go back to BasicStamp and try using long integers to do floating math for a while.... And you will be back to BasicX in no time..... I am very very new to m...

serial comunicatiom with a basicx and a basic stamp bs2px   [3 Articles]

Is it possible to comunicate between a basicstamp and a basicx? ...

BX-24 vs BasicStamp   [25 Articles]

I've been wondering why the BasicStamp seems to be more popular than the BX-24. Perhaps it's not but some superficial evidence is that the basicstamps Yahoo group...

basiscX

hi all I am a basicstamp (Pbasic) user just ran across BX24 (saw the kit for $100) can anybody recommend a good temp sensor that can be placed 50 to 100 feet fr...

Re: Hi, Newbie Questions about the BasicX chip   [3 Articles]

Thanks Tom. Much appreciated your response with some code there as well. I bought a BasicStamp 2p for $89.00 AUS. As the XBasic chip is more powerfull and I like the code as I pro...

portA, Bit0-Bit7   [2 Articles]

Hello fellows In Parallax BasicStamp one can define the logic state of 8 pins using something like: %11100111 Can we do something similar in BasicX? Looking at the Hardware R...

wheel's Mouse ?

Hi Frank, It east can be a stupid question, but why the serrated roller (wheel to scroll) of run of text of my mouse does not function in the window of BasicXEditor ?...

Re: What happened to www.bxdocs.com? - The Basic X Document Group   [2 Articles]

--- In basicx@basi..., "arhodes19044" wrote: > Kramer, You are right, I could find no reference to the function of > JP8. Actually I did not find anything fo...

RE: Convert!

Hi Peter, I think that both the BasicStamp and the BX-24 only allow serial input via one pin at a time. With the Stamp, you tell it to wait for input on some pin...

Re: My first BasicX stamp...questions

--- In b...@yahoogroups.com, "Chris" wrote: > > I just got my new stamp in the mail. I've been using Parallax Basic > Stamps, with a Homework Board. I can just pop the B...

Hello.

I am new to BasicX i just bought my Basicx24. So i am worried about the old serin serout command available in the basicstamp. i know that these kind of routin can...

The Finite State Machine.   [2 Articles]

Hi I´ve read an interesting article about a special way of programming. You can find the article as a ZIP file at : http://www.verinet.com/~dlc/Boe-bot.zip ...

Re: NetMedia Forum   [2 Articles]

--- In basicx@basi..., "tombhandley" wrote: > Is there any chance of NetMedia hosting a forum using more popular > software instead of Yahoo? I have ...

LowByte / High Byte   [2 Articles]

I am using the MotorMind C Got it to work the first time The Serial Send is &D0,&01,&04,Mot1HighByte,Mot1LowByte,Mot2HighByte,Mot2LowByte,CheckSum ...

Re: Getting started   [2 Articles]

--- In , "nuepatrick" wrote: > which is better the basicx or the basicatom24? I haven't used the BasicAtom but a cursory examination of the ...

Re: A couple newbie questions   [2 Articles]

Hi Rick, I teach robotics using the BX-24 and have found it is worth using Robodyssey System's RAMB II motherboard for all my BX-24 applications. (See www.robodyssey.com) ...

Re: Measuring RPM off a car into the BasicX-24   [2 Articles]

--- In basicx@basi..., "wurlitzer28" wrote: > I am planning to do this on my Onan Gas 4.5KW RV genset. The > Onan board has failed twice since I hav...

Re: Message to Group Owner

gavspav wrote: > Hi, > > I posted a message a few days ago asking for newbie help - how not to > blow the bx-24 up! > > It still hasn't appeared. Is this because:...

programming language.   [6 Articles]

What other microcontrollers are there out there that use the Basic language to program its microcontrollers. Am i correct to say that both the BasicX and BasicSta...

RE: Re: Looking for a uController   [2 Articles]

> ... would you agree that BS2 is easier for learning purpose? Learning what? would determine a specific answer to that, but by my experience, in retrospect, no....

Re: Com 3 port issues   [3 Articles]

--- In , Philippe DAROUX wrote: > Anybody ever managed to open two Com3 ports on a BX-24? Com3 is a software UART (as opposed Com1 which is a hard...

Re: Using BasicX-24 in a Model Rocket   [3 Articles]

Hi Ken! I'm Marcelo from Argentina, and suscribed that list, for the same reason! I'm Rocket modelist, and I'm in search of develop with help of a few friends,...

Re: BX-24 vs BasicStamp   [3 Articles]

[Moderator's note: This message is a reply to a three-year-old thread started by Don Kinzer. IMO, it belongs on a Parallax forum, where it is likely to be received better. Do oth...

Re: How to convert a serial 4x20LCD code into a 2x16LCD

I got it working, finally.. The fault was mine since I, with my limited electronic knowledge, used a display which needed a BasicStamp-protocol. Not easy to kn...

Re: PID code uploaded - this is the description.

Thanks for the post, and the kind words. Being in education, it's nice to be appreciated sometimes. Though I'm not setup to test it out, it looks good. I could ...

Re: SoftWIRE users?

In a message dated 12/29/2003 12:19:00 PM Eastern Standard Time, writes: I use Measurement Computing's (ComputerBoards) SoftWIRE for GPIB control of bench instr...

RE: New user and basic stamp

Hi, Tony. It was plain luck that the first microcontroller I bought was BX-24, but previous to that I was keen on buying the BasicStamp because I saw it in a l...

Re: BX-24 Future?   [7 Articles]

John Piccirillo wrote: >>>I teach a class, as a part-time university instructor, in which >>>students design mobile robots for various contests. >>>The process...

Re: BX24 Versus PIC Using C Code   [2 Articles]

--- In , "harrybstoner" wrote: > [...] But I'm also looking at general PIC programming with C > compilers. Can anyone who has worked in both enviro...

Measuring Frequency with BasicX vs Basic-Stamp   [5 Articles]

I am trying to duplicate existing functionality on a Basic-Stamp project with the BasicX microcontroller. The Basic-Stamp project is able to measure frequency up...

Re: RISC big or small. Harvard Architecture or pseudo-Von Neuman?   [3 Articles]

> This group is about BasicX and not AVR. I suggest you ask your question > on the AVR-Chat group. The answer to your question doesn't make any > difference, does it...

Re: Help! I seem to have killed my BX24   [2 Articles]

Painful as it is, we all 'let a little smoke out of the ICs' from time to time. Obviously, it is less painful if the part is $.50 rather than $50. Establi...

Re: Determine Frequency   [3 Articles]

--- In , "Keith" wrote: > > Would you recommend the Comparator over the Frequency to Voltage IC? Which route to go depends on a lot of fac...

Re: non-Serial LCD question

--- In , "naimead" wrote: > What is the difference between a serial and a non-serial LCD? > Can the second one work with BX24? If the LCD doe...

Re: Is a BX24 fast enough?   [4 Articles]

On Sun, 11 Jun 2000 23:54:20 +0800, Jean-Michel Howland <> wrote: > I have tried hundreds of variations of this code, tried the InputCapture > and ShiftIn com...

RE: vastly improved thread

You'll have to explain this a little further, as you've included the second half of the original message :-) Basically, Parallax is offering a trade-in for the B...