Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

Hi,

I have a circuit and stripboard layout that allows me to plug a BX-24
into a BX-35 socket. Obviously you don't get all of the BX-35
functionality as there are less pins on a BX-24. There are some tricks
to laying out the board and building it. The circuit board is only 2.4"
by 0.9" and also connect pins 25, 26, 27 and SCK, MISO and MOSI on the
BX-24 are connected to the corresponding I/O pins on a BX-35. This is
not a pretty PCB but it does the job.

Let me know if you would be interested in such a circuit and I can write
it up and publish it.

Mike
http://home.austin.rr.com/perks/basicx/Articles/





(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )