Sign in
Search basicx
Subscribe to basicx
basicx by Keywords
Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB
Ads
Discussion Groups
Discussion Groups | BasicX | how to control a step motor
Discussion forum for the BasicX family of microcontroller chips.
how to control a step motor - gekil888 - Dec 23 15:41:58 2006
hello there...cause i am new with bx-24 i would be very greatful if
you could help me for how to control a step motor.i have a bipolar
one(with four wires from a printer)...and wonder if anyone has any
shematic for the connection.also i wonder...do l293d h-bridge works
fine with the step motor or i need sn754410?i would be very greatful
for your help with some example code also.
thats all for now...thanks for your time
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
you could help me for how to control a step motor.i have a bipolar
one(with four wires from a printer)...and wonder if anyone has any
shematic for the connection.also i wonder...do l293d h-bridge works
fine with the step motor or i need sn754410?i would be very greatful
for your help with some example code also.
thats all for now...thanks for your time
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: how to control a step motor - shobair3000 - Dec 24 17:03:18 2006
hi gekil
i can help u by doing my way. u have to have (Driver ) for the motor
to amplify the signal coming from the basicx24.
so the connection will be as follows:
Basicx24----->driver---------> motor
i recommend u to use ST200 as driver (http://www.tecel.com/st200/)
u need 12 v source for the driver. if u r ready tell me to complete
the connection and then the code.
regards
--- In b...@yahoogroups.com, "gekil888" wrote:
>
> hello there...cause i am new with bx-24 i would be very greatful if
> you could help me for how to control a step motor.i have a bipolar
> one(with four wires from a printer)...and wonder if anyone has any
> shematic for the connection.also i wonder...do l293d h-bridge works
> fine with the step motor or i need sn754410?i would be very greatful
> for your help with some example code also.
>
> thats all for now...thanks for your time
>
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
i can help u by doing my way. u have to have (Driver ) for the motor
to amplify the signal coming from the basicx24.
so the connection will be as follows:
Basicx24----->driver---------> motor
i recommend u to use ST200 as driver (http://www.tecel.com/st200/)
u need 12 v source for the driver. if u r ready tell me to complete
the connection and then the code.
regards
--- In b...@yahoogroups.com, "gekil888"
>
> hello there...cause i am new with bx-24 i would be very greatful if
> you could help me for how to control a step motor.i have a bipolar
> one(with four wires from a printer)...and wonder if anyone has any
> shematic for the connection.also i wonder...do l293d h-bridge works
> fine with the step motor or i need sn754410?i would be very greatful
> for your help with some example code also.
>
> thats all for now...thanks for your time
>
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )