Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

You should just be able to talk to it using a serial connection. I think
it's 4800 baud.

I have one of the Parallax GPS units and there are two modes. The normal
mode just sends out NMEA lines that you can parse with the BX24. And a smart
mode, where you simply ask for the data you want. The smart mode however, is
somewhat slow in that it has to wait for the NMEA line to pass before it
responds.

Parallax supplies the code that runs on the GPS. You would need to download
their SX/B compiler and have a SX-Key to download a modified firmware. This
would be a bit advanced, but could be done.

Jim Fouch

FOUCH SOFTWARE

(814) 460-8571

From: b...@yahoogroups.com [mailto:b...@yahoogroups.com] On Behalf Of
mconcepcion1510
Sent: Wednesday, March 19, 2008 11:02 PM
To: b...@yahoogroups.com
Subject: [BasicX] Help to program a Parallax GPS in the Basicx-24p

Hi, I need help to program the parallax GPS in the BasicX-24
microcontroller can any one help me please??. Or give me a Hint about
how start?

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )

I want to use it read the NMEA lines, how i do that because I have no
Idea How to do that.
--- In b...@yahoogroups.com, "Jim Fouch" wrote:
>
> You should just be able to talk to it using a serial connection. I
think
> it's 4800 baud.
>
>
>
> I have one of the Parallax GPS units and there are two modes. The
normal
> mode just sends out NMEA lines that you can parse with the BX24.
And a smart
> mode, where you simply ask for the data you want. The smart mode
however, is
> somewhat slow in that it has to wait for the NMEA line to pass
before it
> responds.
>
>
>
> Parallax supplies the code that runs on the GPS. You would need to
download
> their SX/B compiler and have a SX-Key to download a modified
firmware. This
> would be a bit advanced, but could be done.
>
>
>
> Jim Fouch
>
> FOUCH SOFTWARE
>
> (814) 460-8571
>
>
>
> From: b...@yahoogroups.com [mailto:b...@yahoogroups.com] On
Behalf Of
> mconcepcion1510
> Sent: Wednesday, March 19, 2008 11:02 PM
> To: b...@yahoogroups.com
> Subject: [BasicX] Help to program a Parallax GPS in the Basicx-24p
>
>
>
> Hi, I need help to program the parallax GPS in the BasicX-24
> microcontroller can any one help me please??. Or give me a Hint
about
> how start?
>
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )