Sign in
Search basicx
Subscribe to basicx
basicx by Keywords
Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB
Ads
Discussion Groups
Discussion Groups | BasicX | Re: Need input on PCBoard Prototype
Discussion forum for the BasicX family of microcontroller chips.
Re: Need input on PCBoard Prototype - Don Lewis - May 2 0:12:30 2008
I've used
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
For my projects, you can get a online qoute for custom boards.
If you can design within their 2.5" x 3.8" board it is three
for $51.00.
--- In b...@yahoogroups.com, "James R. Parish" wrote:
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
For my projects, you can get a online qoute for custom boards.
If you can design within their 2.5" x 3.8" board it is three
for $51.00.
--- In b...@yahoogroups.com, "James R. Parish"
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Re: Need input on PCBoard Prototype - rosa...@aol.com - May 2 1:46:03 2008
Hi,
I used this printed circuit board from radio shack for my prototype projects. Check
it out online to see if this is what are your looking. You can order it online or
you can buy it in the nearest radio shack store.
The board is 3.75 x 2.81.
Universal Component PC
Board with 780 Holes
Model: 276-168??|? Catalog #: 276-168
price is? $3.49
rosarite
-----Original Message-----
From: Don Lewis
To: b...@yahoogroups.com
Sent: Thu, 1 May 2008 11:12 pm
Subject: [BasicX] Re: Need input on PCBoard Prototype
I've used
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
For my projects, you can get a online qoute for custom boards.
If you can design within their 2.5" x 3.8" board it is three
for $51.00.
--- In b...@yahoogroups.com, "James R. Parish" wrote:
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
I used this printed circuit board from radio shack for my prototype projects. Check
it out online to see if this is what are your looking. You can order it online or
you can buy it in the nearest radio shack store.
The board is 3.75 x 2.81.
Universal Component PC
Board with 780 Holes
Model: 276-168??|? Catalog #: 276-168
price is? $3.49
rosarite
-----Original Message-----
From: Don Lewis
To: b...@yahoogroups.com
Sent: Thu, 1 May 2008 11:12 pm
Subject: [BasicX] Re: Need input on PCBoard Prototype
I've used
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
For my projects, you can get a online qoute for custom boards.
If you can design within their 2.5" x 3.8" board it is three
for $51.00.
--- In b...@yahoogroups.com, "James R. Parish"
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Need input on PCBoard Prototype - danalf2005 - May 2 12:12:52 2008
--- In b...@yahoogroups.com, "Don Lewis" wrote:
>
> I've used
> http://www.expresspcb.com/ExpressPCBHtm/Download.htm
> For my projects, you can get a online qoute for custom boards.
> If you can design within their 2.5" x 3.8" board it is three
> for $51.00.
>
> --- In b...@yahoogroups.com, "James R. Parish" wrote:
> >
> > Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> > PCboards made? Personal experience is what I need, I can search for a
> > few dozen myself but would like some feedback on some good companies
> > someone has used.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> I have used * http://www.expresspcb.com/ * and found there work and
service good.
I was designing in house test fixtures.
For me it worked well, I needed many different PCBs and was able to
put them on one blank.
I hope this helps.
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
>
> I've used
> http://www.expresspcb.com/ExpressPCBHtm/Download.htm
> For my projects, you can get a online qoute for custom boards.
> If you can design within their 2.5" x 3.8" board it is three
> for $51.00.
>
> --- In b...@yahoogroups.com, "James R. Parish"
> >
> > Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> > PCboards made? Personal experience is what I need, I can search for a
> > few dozen myself but would like some feedback on some good companies
> > someone has used.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> I have used * http://www.expresspcb.com/ * and found there work and
service good.
I was designing in house test fixtures.
For me it worked well, I needed many different PCBs and was able to
put them on one blank.
I hope this helps.
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Need input on PCBoard Prototype - kitxgroups - May 2 12:51:39 2008
Do you have a link the actual page on the Radio Shack website? I
think I can imagine the boards you are referring to but it would be
nice to be able to see them.
$ 51 for 3 tiny boards does seem pretty pricy to a hobbyist on this
side of the pond. Of course the Express PCB boards are professionally
done and are good for those working towards production.
Does anyone know of cheaper suppliers for singles or small
quantities, perhaps from east or central Europe?
Thanks
--- In b...@yahoogroups.com, rosarite@... wrote:
>
> Hi,
> I used this printed circuit board from radio shack for my prototype
projects. Check
> it out online to see if this is what are your looking. You can
order it online or
> you can buy it in the nearest radio shack store.
> The board is 3.75 x 2.81.
>
> Universal Component PC
> Board with 780 Holes
>
> Model: 276-168??|? Catalog #: 276-168
>
> price is? $3.49
> rosarite
>
> -----Original Message-----
> From: Don Lewis
> To: b...@yahoogroups.com
> Sent: Thu, 1 May 2008 11:12 pm
> Subject: [BasicX] Re: Need input on PCBoard Prototype
>
>
>
> I've used
>
> http://www.expresspcb.com/ExpressPCBHtm/Download.htm
>
> For my projects, you can get a online qoute for custom boards.
>
> If you can design within their 2.5" x 3.8" board it is three
>
> for $51.00.
>
> --- In b...@yahoogroups.com, "James R. Parish"
>
> > > Does anyone have a real inexpensive place to get 2-3 4x6"
Prototype
>
> > PCboards made? Personal experience is what I need, I can search
for a
>
> > few dozen myself but would like some feedback on some good
companies
>
> > someone has used.
>
> > > > > [Non-text portions of this message have been removed]
>
> >
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Re: Need input on PCBoard Prototype - rosa...@aol.com - May 2 13:52:48 2008
Hi,
Yes, here is the link.
http://www.radioshack.com/product/index.jsp?productId=2103800&cp
rosarite
-----Original Message-----
From: kitxgroups
To: b...@yahoogroups.com
Sent: Fri, 2 May 2008 11:51 am
Subject: [BasicX] Re: Need input on PCBoard Prototype
Do you have a link the actual page on the Radio Shack website? I
think I can imagine the boards you are referring to but it would be
nice to be able to see them.
$ 51 for 3 tiny boards does seem pretty pricy to a hobbyist on this
side of the pond. Of course the Express PCB boards are professionally
done and are good for those working towards production.
Does anyone know of cheaper suppliers for singles or small
quantities, perhaps from east or central Europe?
Thanks
--- In b...@yahoogroups.com, rosarite@... wrote:
>
> Hi,
>
>
> I used this printed circuit board from radio shack for my prototype
projects. Check
> it out online to see if this is what are your looking. You can
order it online or
> you can buy it in the nearest radio shack store.
>
>
>
>
>
>
> The board is 3.75 x 2.81.
>
>
>
>
>
>
>
> Universal Component PC
> Board with 780 Holes
>
> Model: 276-168??|? Catalog #: 276-168
>
>
>
> price is? $3.49
>
>
>
>
> rosarite
>
>
>
> -----Original Message-----
> From: Don Lewis
> To: b...@yahoogroups.com
> Sent: Thu, 1 May 2008 11:12 pm
> Subject: [BasicX] Re: Need input on PCBoard Prototype
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I've used
>
> http://www.expresspcb.com/ExpressPCBHtm/Download.htm
>
> For my projects, you can get a online qoute for custom boards.
>
> If you can design within their 2.5" x 3.8" board it is three
>
> for $51.00.
>
>
>
> --- In b...@yahoogroups.com, "James R. Parish" wrote:
>
> >
>
> > Does anyone have a real inexpensive place to get 2-3 4x6"
Prototype
>
> > PCboards made? Personal experience is what I need, I can search
for a
>
> > few dozen myself but would like some feedback on some good
companies
>
> > someone has used.
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Yes, here is the link.
http://www.radioshack.com/product/index.jsp?productId=2103800&cp
rosarite
-----Original Message-----
From: kitxgroups
To: b...@yahoogroups.com
Sent: Fri, 2 May 2008 11:51 am
Subject: [BasicX] Re: Need input on PCBoard Prototype
Do you have a link the actual page on the Radio Shack website? I
think I can imagine the boards you are referring to but it would be
nice to be able to see them.
$ 51 for 3 tiny boards does seem pretty pricy to a hobbyist on this
side of the pond. Of course the Express PCB boards are professionally
done and are good for those working towards production.
Does anyone know of cheaper suppliers for singles or small
quantities, perhaps from east or central Europe?
Thanks
--- In b...@yahoogroups.com, rosarite@... wrote:
>
> Hi,
>
>
> I used this printed circuit board from radio shack for my prototype
projects. Check
> it out online to see if this is what are your looking. You can
order it online or
> you can buy it in the nearest radio shack store.
>
>
>
>
>
>
> The board is 3.75 x 2.81.
>
>
>
>
>
>
>
> Universal Component PC
> Board with 780 Holes
>
> Model: 276-168??|? Catalog #: 276-168
>
>
>
> price is? $3.49
>
>
>
>
> rosarite
>
>
>
> -----Original Message-----
> From: Don Lewis
> To: b...@yahoogroups.com
> Sent: Thu, 1 May 2008 11:12 pm
> Subject: [BasicX] Re: Need input on PCBoard Prototype
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I've used
>
> http://www.expresspcb.com/ExpressPCBHtm/Download.htm
>
> For my projects, you can get a online qoute for custom boards.
>
> If you can design within their 2.5" x 3.8" board it is three
>
> for $51.00.
>
>
>
> --- In b...@yahoogroups.com, "James R. Parish"
>
> >
>
> > Does anyone have a real inexpensive place to get 2-3 4x6"
Prototype
>
> > PCboards made? Personal experience is what I need, I can search
for a
>
> > few dozen myself but would like some feedback on some good
companies
>
> > someone has used.
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Need input on PCBoard Prototype - "joseph.dugay" - May 2 20:18:54 2008
Depending what you were looking for in prototype board, you have some
options. Custom designing your own is an option, but for only a
quantity of a few can be expensive.
I have used prototype boards from MELabs (expensive), Olimex and also
ones from pcboard.ca. They have a couple of different models
depending on the PIC chips you are using (28, 18 and 40-pin models)
and have lots of room for doing your own thing on them. Just picked
up some of the Proto-40 and received them in about six days - take a
look at http://www.pcboard.ca/Kits/Proto40/
Joseph
--- In b...@yahoogroups.com, "kitxgroups" wrote:
> Do you have a link the actual page on the Radio Shack website? I
> think I can imagine the boards you are referring to but it would be
> nice to be able to see them.
>
> $ 51 for 3 tiny boards does seem pretty pricy to a hobbyist on this
> side of the pond. Of course the Express PCB boards are
professionally
> done and are good for those working towards production.
>
> Does anyone know of cheaper suppliers for singles or small
> quantities, perhaps from east or central Europe?
>
> Thanks
> --- In b...@yahoogroups.com, rosarite@ wrote:
> >
> > Hi,
> >
> >
> > I used this printed circuit board from radio shack for my
prototype
> projects. Check
> > it out online to see if this is what are your looking. You can
> order it online or
> > you can buy it in the nearest radio shack store.
> >
> >
> >
> >
> >
> >
> > The board is 3.75 x 2.81.
> >
> >
> >
> >
> >
> >
> >
> > Universal Component PC
> > Board with 780 Holes
> >
> > Model: 276-168??|? Catalog #: 276-168
> >
> >
> >
> > price is? $3.49
> >
> >
> >
> >
> > rosarite
> >
> >
> >
> > -----Original Message-----
> > From: Don Lewis
> > To: b...@yahoogroups.com
> > Sent: Thu, 1 May 2008 11:12 pm
> > Subject: [BasicX] Re: Need input on PCBoard Prototype
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I've used
> >
> > http://www.expresspcb.com/ExpressPCBHtm/Download.htm
> >
> > For my projects, you can get a online qoute for custom boards.
> >
> > If you can design within their 2.5" x 3.8" board it is three
> >
> > for $51.00.
> >
> >
> >
> > --- In b...@yahoogroups.com, "James R. Parish" wrote:
> >
> > >
> >
> > > Does anyone have a real inexpensive place to get 2-3 4x6"
> Prototype
> >
> > > PCboards made? Personal experience is what I need, I can
search
> for a
> >
> > > few dozen myself but would like some feedback on some good
> companies
> >
> > > someone has used.
> >
> > >
> >
> > >
> >
> > >
> >
> > > [Non-text portions of this message have been removed]
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
options. Custom designing your own is an option, but for only a
quantity of a few can be expensive.
I have used prototype boards from MELabs (expensive), Olimex and also
ones from pcboard.ca. They have a couple of different models
depending on the PIC chips you are using (28, 18 and 40-pin models)
and have lots of room for doing your own thing on them. Just picked
up some of the Proto-40 and received them in about six days - take a
look at http://www.pcboard.ca/Kits/Proto40/
Joseph
--- In b...@yahoogroups.com, "kitxgroups"
> Do you have a link the actual page on the Radio Shack website? I
> think I can imagine the boards you are referring to but it would be
> nice to be able to see them.
>
> $ 51 for 3 tiny boards does seem pretty pricy to a hobbyist on this
> side of the pond. Of course the Express PCB boards are
professionally
> done and are good for those working towards production.
>
> Does anyone know of cheaper suppliers for singles or small
> quantities, perhaps from east or central Europe?
>
> Thanks
> --- In b...@yahoogroups.com, rosarite@ wrote:
> >
> > Hi,
> >
> >
> > I used this printed circuit board from radio shack for my
prototype
> projects. Check
> > it out online to see if this is what are your looking. You can
> order it online or
> > you can buy it in the nearest radio shack store.
> >
> >
> >
> >
> >
> >
> > The board is 3.75 x 2.81.
> >
> >
> >
> >
> >
> >
> >
> > Universal Component PC
> > Board with 780 Holes
> >
> > Model: 276-168??|? Catalog #: 276-168
> >
> >
> >
> > price is? $3.49
> >
> >
> >
> >
> > rosarite
> >
> >
> >
> > -----Original Message-----
> > From: Don Lewis
> > To: b...@yahoogroups.com
> > Sent: Thu, 1 May 2008 11:12 pm
> > Subject: [BasicX] Re: Need input on PCBoard Prototype
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I've used
> >
> > http://www.expresspcb.com/ExpressPCBHtm/Download.htm
> >
> > For my projects, you can get a online qoute for custom boards.
> >
> > If you can design within their 2.5" x 3.8" board it is three
> >
> > for $51.00.
> >
> >
> >
> > --- In b...@yahoogroups.com, "James R. Parish"
> >
> > >
> >
> > > Does anyone have a real inexpensive place to get 2-3 4x6"
> Prototype
> >
> > > PCboards made? Personal experience is what I need, I can
search
> for a
> >
> > > few dozen myself but would like some feedback on some good
> companies
> >
> > > someone has used.
> >
> > >
> >
> > >
> >
> > >
> >
> > > [Non-text portions of this message have been removed]
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )