Sign in
Search basicx
Subscribe to basicx
basicx by Keywords
Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB
Sponsor
Ads
Discussion Groups
See Also
Discussion Groups | BasicX | Re: Need input on PCBoard Prototype
Discussion forum for the BasicX family of microcontroller chips.
Re: Need input on PCBoard Prototype - Don LeRoi - May 4 17:26:59 2008
James,
I imagine you have your boards by now, but I still want to plug
ExpressPCB. If I need only one board and I'm in a big rush, I'll use
the ExpressPCB software to design it, usually single-sided, then print
the design on clear acetate and make my own board. Otherwise, I've
found I can fit almost anything I do on their 3.8" x 2.5", double-
sided, 3 for $51.00, mini-boards. Their work is great and the boards
arrive in 3 days - drilled and tinned. To me, it seems a bargain.
- Don
--- In b...@yahoogroups.com, "James R. Parish" wrote:
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
I imagine you have your boards by now, but I still want to plug
ExpressPCB. If I need only one board and I'm in a big rush, I'll use
the ExpressPCB software to design it, usually single-sided, then print
the design on clear acetate and make my own board. Otherwise, I've
found I can fit almost anything I do on their 3.8" x 2.5", double-
sided, 3 for $51.00, mini-boards. Their work is great and the boards
arrive in 3 days - drilled and tinned. To me, it seems a bargain.
- Don
--- In b...@yahoogroups.com, "James R. Parish"
>
> Does anyone have a real inexpensive place to get 2-3 4x6" Prototype
> PCboards made? Personal experience is what I need, I can search for a
> few dozen myself but would like some feedback on some good companies
> someone has used.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )