Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

Hi!

I need a transmiter/reciver for my bx-24 for a school project can
someone help me to find one?

Thanks

------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )

Hi,
You do not mention what type of tx/rx you want. There are different type of tx/rx. Here is a link for a rf serial tx/rx used in building robot.
http://www.rentron.com/rf_remote_control.htm

Hoped this is what your are looking.
rosarite

-----Original Message-----
From: sousax69
To: b...@yahoogroups.com
Sent: Thu, 25 Sep 2008 5:29 pm
Subject: [BasicX] transmiter/reciver for my bx-24

Hi!

I need a transmiter/reciver for my bx-24 for a school project can

someone help me to find one?

Thanks

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )

I use the UM96.
See: http://www.sparkfun.com/datasheets/RF/HAC-UM96_manual.pdf

--- On Fri, 9/26/08, sousax69 wrote:

From: sousax69
Subject: [BasicX] transmiter/reciver for my bx-24
To: b...@yahoogroups.com
Date: Friday, September 26, 2008, 12:29 AM

Hi!

I need a transmiter/reciver for my bx-24 for a school project can
someone help me to find one?

Thanks

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )

Do you have any more information regarding your requirements? I have found
the XBEE's to be great radios and a great price but they may be overkill for
your application. There are some "chip" based radios that are around $5 if
I remember correctly but are limited in capability. Please give the group a
better idea of what you need. Thanks.

On Thu, Sep 25, 2008 at 5:29 PM, sousax69 wrote:

> Hi!
>
> I need a transmiter/reciver for my bx-24 for a school project can
> someone help me to find one?
>
> Thanks
[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )