Sign in
Search basicx
Subscribe to basicx
basicx by Keywords
Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB
New!
Discussion Groups
See Also
Discussion Groups | BasicX | Weght Scale with analog or digital output
Discussion forum for the BasicX family of microcontroller chips.
Weght Scale with analog or digital output - David Sousa Mendes - Oct 8 5:43:22 2008
Hello fellows
I'm looking for a weight scale with an analog output (4-20mA or 0-5V) to connect to the BX24. The range doesn't need to be bigger than 0-1Kg and the precision doesn't need to be higher than 1g.
As a second choice RS232 output is acceptable.
Any ideas?
Thanks in advance
David M.
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
I'm looking for a weight scale with an analog output (4-20mA or 0-5V) to connect to the BX24. The range doesn't need to be bigger than 0-1Kg and the precision doesn't need to be higher than 1g.
As a second choice RS232 output is acceptable.
Any ideas?
Thanks in advance
David M.
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Weght Scale with analog or digital output - Darren Olson - Oct 8 8:38:06 2008
http://www.doranscales.com/data-communications.htm
On Wed, Oct 8, 2008 at 5:43 AM, David Sousa Mendes
> Hello fellows
> I'm looking for a weight scale with an analog output (4-20mA or 0-5V) to
> connect to the BX24. The range doesn't need to be bigger than 0-1Kg and the
> precision doesn't need to be higher than 1g.
> As a second choice RS232 output is acceptable.
> Any ideas?
> Thanks in advance
>
> David M.
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
______________________________
TI's C2000™ microcontrollers controlSUITE™ Desktop gives you instant access to all supporting software libraries, training, collateral, and more!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
On Wed, Oct 8, 2008 at 5:43 AM, David Sousa Mendes
> Hello fellows
> I'm looking for a weight scale with an analog output (4-20mA or 0-5V) to
> connect to the BX24. The range doesn't need to be bigger than 0-1Kg and the
> precision doesn't need to be higher than 1g.
> As a second choice RS232 output is acceptable.
> Any ideas?
> Thanks in advance
>
> David M.
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
------------------------------------
______________________________
TI's C2000™ microcontrollers controlSUITE™ Desktop gives you instant access to all supporting software libraries, training, collateral, and more!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: Weght Scale with analog or digital output - Kevin_Kaczmarek - Oct 9 12:11:14 2008
RS232 scales
www.oldwillknottscales.com
--- In b...@yahoogroups.com, "David Sousa Mendes"
wrote:
>
> Hello fellows
> I'm looking for a weight scale with an analog output (4-20mA or
0-5V) to connect to the BX24. The range doesn't need to be bigger than
0-1Kg and the precision doesn't need to be higher than 1g.
> As a second choice RS232 output is acceptable.
> Any ideas?
> Thanks in advance
>
> David M.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
______________________________
Have a look at the new TI MCU Center on EmbeddedRelated.com!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
www.oldwillknottscales.com
--- In b...@yahoogroups.com, "David Sousa Mendes"
>
> Hello fellows
> I'm looking for a weight scale with an analog output (4-20mA or
0-5V) to connect to the BX24. The range doesn't need to be bigger than
0-1Kg and the precision doesn't need to be higher than 1g.
> As a second choice RS232 output is acceptable.
> Any ideas?
> Thanks in advance
>
> David M.
>
> [Non-text portions of this message have been removed]
>
------------------------------------
______________________________
Have a look at the new TI MCU Center on EmbeddedRelated.com!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )