Sign in
Search basicx
Subscribe to basicx
basicx by Keywords
Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB
Sponsor
Discussion Groups
See Also
Discussion Groups | BasicX | bx24 and board of education (parallax).
Discussion forum for the BasicX family of microcontroller chips.
bx24 and board of education (parallax). - ribron32 - May 19 11:18:21 2009
I have a bx24 as well as a few basic stamps. I would like to use the bx24 on the BOE, if
possible. Has anyone here ever used the bx24 on the BOE? If so is the pins basically the
same? I would be very interested in learning of any of the possibilitys of using the bx24,
and the boe board.. Thank you _Duane Ribron
------------------------------------
______________________________
TI's C2000™ microcontrollers controlSUITE™ Desktop gives you instant access to all supporting software libraries, training, collateral, and more!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
------------------------------------
______________________________
TI's C2000™ microcontrollers controlSUITE™ Desktop gives you instant access to all supporting software libraries, training, collateral, and more!
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: bx24 and board of education (parallax). - Tom Becker - May 19 11:35:25 2009
> ... Has anyone here ever used the bx24 on the BOE?
Yes, many have used the a BX-24 on a BOE. The hardware is compatible.
Tom
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Yes, many have used the a BX-24 on a BOE. The hardware is compatible.
Tom
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: bx24 and board of education (parallax). - Zack Jarrett - May 19 12:00:40 2009
I use a BX24 on my Parallax board of education (BOE) regularly. I
have two BOEs; 1 serial and 1 USB. The only problem I've run into is
that the BX24 isn't programmable on the USB board. The BX24 runs just
fine on there but I can't program it. I have a feeling that the ATT
line pulses are being modified by the USB-SERIAL bridge. Whatever the
cause, I haven't spent much time investigating because I also have a
serial board of education and the BX24 works perfectly in all ways on
that board.
The short answer is: Yes, the BX24 will work on your SERIAL board of
education.
Zack
On May 16, 2009, at 2:33 PM, ribron32 wrote:
> I have a bx24 as well as a few basic stamps. I would like to use the
> bx24 on the BOE, if possible. Has anyone here ever used the bx24 on
> the BOE? If so is the pins basically the same? I would be very
> interested in learning of any of the possibilitys of using the bx24,
> and the boe board.. Thank you _Duane Ribron
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
have two BOEs; 1 serial and 1 USB. The only problem I've run into is
that the BX24 isn't programmable on the USB board. The BX24 runs just
fine on there but I can't program it. I have a feeling that the ATT
line pulses are being modified by the USB-SERIAL bridge. Whatever the
cause, I haven't spent much time investigating because I also have a
serial board of education and the BX24 works perfectly in all ways on
that board.
The short answer is: Yes, the BX24 will work on your SERIAL board of
education.
Zack
On May 16, 2009, at 2:33 PM, ribron32 wrote:
> I have a bx24 as well as a few basic stamps. I would like to use the
> bx24 on the BOE, if possible. Has anyone here ever used the bx24 on
> the BOE? If so is the pins basically the same? I would be very
> interested in learning of any of the possibilitys of using the bx24,
> and the boe board.. Thank you _Duane Ribron
>
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
Re: bx24 and board of education (parallax). - duane ribron - May 19 12:07:14 2009
That's goodm news. I'll have to try and play with it then.. Thank you
--- On Tue, 5/19/09, Zack Jarrett wrote:
From: Zack Jarrett
Subject: Re: [BasicX] bx24 and board of education (parallax).
To: b...@yahoogroups.com
Date: Tuesday, May 19, 2009, 8:30 AM
I use a BX24 on my Parallax board of education (BOE) regularly. I
have two BOEs; 1 serial and 1 USB. The only problem I've run into is
that the BX24 isn't programmable on the USB board. The BX24 runs just
fine on there but I can't program it. I have a feeling that the ATT
line pulses are being modified by the USB-SERIAL bridge. Whatever the
cause, I haven't spent much time investigating because I also have a
serial board of education and the BX24 works perfectly in all ways on
that board.
The short answer is: Yes, the BX24 will work on your SERIAL board of
education.
Zack
On May 16, 2009, at 2:33 PM, ribron32 wrote:
> I have a bx24 as well as a few basic stamps. I would like to use the
> bx24 on the BOE, if possible. Has anyone here ever used the bx24 on
> the BOE? If so is the pins basically the same? I would be very
> interested in learning of any of the possibilitys of using the bx24,
> and the boe board.. Thank you _Duane Ribron
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )
--- On Tue, 5/19/09, Zack Jarrett
From: Zack Jarrett
Subject: Re: [BasicX] bx24 and board of education (parallax).
To: b...@yahoogroups.com
Date: Tuesday, May 19, 2009, 8:30 AM
I use a BX24 on my Parallax board of education (BOE) regularly. I
have two BOEs; 1 serial and 1 USB. The only problem I've run into is
that the BX24 isn't programmable on the USB board. The BX24 runs just
fine on there but I can't program it. I have a feeling that the ATT
line pulses are being modified by the USB-SERIAL bridge. Whatever the
cause, I haven't spent much time investigating because I also have a
serial board of education and the BX24 works perfectly in all ways on
that board.
The short answer is: Yes, the BX24 will work on your SERIAL board of
education.
Zack
On May 16, 2009, at 2:33 PM, ribron32 wrote:
> I have a bx24 as well as a few basic stamps. I would like to use the
> bx24 on the BOE, if possible. Has anyone here ever used the bx24 on
> the BOE? If so is the pins basically the same? I would be very
> interested in learning of any of the possibilitys of using the bx24,
> and the boe board.. Thank you _Duane Ribron
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of basicx -- send a blank email to basicx-subscribe@yahoogroups.com )