Sign in
Search fpga-cpu
Subscribe to fpga-cpu
fpga-cpu by Keywords
Altera | CISCifying | IDE | ISA | Java | JHDL | JTAG | LBU | MicroBlaze | PAR | PCI | RISC | SoC | Spartan | Transputers | Verilog | VHDL | Virtex | VLIW | WebPack | Xilinx | Xsoc | YARD-1A
Ads
Discussion Groups
Discussion Groups | FPGA-CPU | Re: Re: Digilent's Nexys
This list is for discussion of the design and implementation of field-programmable gate array based processors and integrated systems. It is also for discussion and community support of the XSOC Project (see http://www.fpgacpu.org/xsoc).
Digilent's Nexys - Manuel Toledo Quinones - Mar 28 10:24:32 2007
Hi,
I want to introduce myself as new member of the list, and take
advantage of the opportunity to ask a question about Digilent's Nexys
Spartan 3 board. I purchase the 1000k gate version. I would like to
use the off-chip memory and tough that a good place to start was the
build-in self test sources that the company provide in their web site.
However, I get error when I try to re-synthesize the source. The
errors are related to unrouted signals. I contacted the company but
haven't receive an answer. I am using version 8.1.0.3 of Xilinx's ISE.
Is anyone using this board? Have you been able to use the bist source?
Thanks,
Manuel
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
I want to introduce myself as new member of the list, and take
advantage of the opportunity to ask a question about Digilent's Nexys
Spartan 3 board. I purchase the 1000k gate version. I would like to
use the off-chip memory and tough that a good place to start was the
build-in self test sources that the company provide in their web site.
However, I get error when I try to re-synthesize the source. The
errors are related to unrouted signals. I contacted the company but
haven't receive an answer. I am using version 8.1.0.3 of Xilinx's ISE.
Is anyone using this board? Have you been able to use the bist source?
Thanks,
Manuel
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Digilent's Nexys - Leslie - Apr 3 12:44:39 2007
Hi Manuel, et al.
--- In f...@yahoogroups.com, "Manuel Toledo Quinones"
wrote:
>
> Hi,
>
> I want to introduce myself as new member of the list, and take
> advantage of the opportunity to ask a question about Digilent's
Nexys
> Spartan 3 board. I purchase the 1000k gate version. I would like to
> use the off-chip memory and tough that a good place to start was the
> build-in self test sources that the company provide in their web
site.
> However, I get error when I try to re-synthesize the source. The
> errors are related to unrouted signals. I contacted the company but
> haven't receive an answer. I am using version 8.1.0.3 of Xilinx's
ISE.
>
> Is anyone using this board? Have you been able to use the bist
source?
I also have a 3s1000 version of this board. Very compact indeed.
I have version 8.2.03i of the Xilinx Webpack software this end.
Several of the files in the Nexys_Bist archive had their "read_only"
status bit set which Webpack complained about at this end.
I changed the target type to xC3s1000-5ft256 and did nothing else to
any of the source files.
There were a fair few warnings (390 total), but it went all the way
through to generating a programming file.
Could you be more specific about the "errors" you received?
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
--- In f...@yahoogroups.com, "Manuel Toledo Quinones"
>
> Hi,
>
> I want to introduce myself as new member of the list, and take
> advantage of the opportunity to ask a question about Digilent's
Nexys
> Spartan 3 board. I purchase the 1000k gate version. I would like to
> use the off-chip memory and tough that a good place to start was the
> build-in self test sources that the company provide in their web
site.
> However, I get error when I try to re-synthesize the source. The
> errors are related to unrouted signals. I contacted the company but
> haven't receive an answer. I am using version 8.1.0.3 of Xilinx's
ISE.
>
> Is anyone using this board? Have you been able to use the bist
source?
I also have a 3s1000 version of this board. Very compact indeed.
I have version 8.2.03i of the Xilinx Webpack software this end.
Several of the files in the Nexys_Bist archive had their "read_only"
status bit set which Webpack complained about at this end.
I changed the target type to xC3s1000-5ft256 and did nothing else to
any of the source files.
There were a fair few warnings (390 total), but it went all the way
through to generating a programming file.
Could you be more specific about the "errors" you received?
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Digilent's Nexys - Leslie - Apr 3 12:47:43 2007
Hi Manuel, et al.
--- In f...@yahoogroups.com, "Manuel Toledo Quinones"
wrote:
>
> Hi,
>
> I want to introduce myself as new member of the list, and take
> advantage of the opportunity to ask a question about Digilent's
Nexys
> Spartan 3 board. I purchase the 1000k gate version. I would like to
> use the off-chip memory and tough that a good place to start was the
> build-in self test sources that the company provide in their web
site.
> However, I get error when I try to re-synthesize the source. The
> errors are related to unrouted signals. I contacted the company but
> haven't receive an answer. I am using version 8.1.0.3 of Xilinx's
ISE.
>
> Is anyone using this board? Have you been able to use the bist
source?
I also have one of the S3-1000 nexys boards this end.
I had no problems compiling the Bist_Nexys demo this end, though I am
using 8.2.03i . There were a fair number of warnings however (390).
Only change I made to the source was to change the FPGA type to the
S3-1000 variety.
Could you be more specific about the errors you received?
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
--- In f...@yahoogroups.com, "Manuel Toledo Quinones"
>
> Hi,
>
> I want to introduce myself as new member of the list, and take
> advantage of the opportunity to ask a question about Digilent's
Nexys
> Spartan 3 board. I purchase the 1000k gate version. I would like to
> use the off-chip memory and tough that a good place to start was the
> build-in self test sources that the company provide in their web
site.
> However, I get error when I try to re-synthesize the source. The
> errors are related to unrouted signals. I contacted the company but
> haven't receive an answer. I am using version 8.1.0.3 of Xilinx's
ISE.
>
> Is anyone using this board? Have you been able to use the bist
source?
I also have one of the S3-1000 nexys boards this end.
I had no problems compiling the Bist_Nexys demo this end, though I am
using 8.2.03i . There were a fair number of warnings however (390).
Only change I made to the source was to change the FPGA type to the
S3-1000 variety.
Could you be more specific about the errors you received?
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Digilent's Nexys - Tony - Apr 4 11:39:08 2007
> Re: Digilent's Nexys
> Posted by: "Leslie" l...@bigpond.net.au redskulldc
> Tue Apr 3, 2007 9:44 am (PST)
> Hi Manuel, et al.
>
> --- In f...@yahoogroups.com, "Manuel Toledo Quinones"
>
>
> > Hi,
> >
> > I want to introduce myself as new member of the list, and take
> > advantage of the opportunity to ask a question about Digilent's
>
> Nexys
>
> > Spartan 3 board. I purchase the 1000k gate version. I would like to
> > use the off-chip memory and tough that a good place to start was the
> > build-in self test sources that the company provide in their web
*snip*
Sorry to veer off topic, but i was going to order one of those myself and only
saw a 500k gate option?
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Digilent's Nexys - Leslie - Apr 4 12:03:09 2007
Hi Tony,
--- In f...@yahoogroups.com, Tony wrote:
> Sorry to veer off topic, but i was going to order one of those myself
and only
> saw a 500k gate option?
They come in 200, 400, or 1000 die versions from digilent.
http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS
After you hit the "Add to cart" button, you are presented with a choice
of which board you wish to purchase.
I have NO association with them by the way.
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
--- In f...@yahoogroups.com, Tony
> Sorry to veer off topic, but i was going to order one of those myself
and only
> saw a 500k gate option?
They come in 200, 400, or 1000 die versions from digilent.
http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS
After you hit the "Add to cart" button, you are presented with a choice
of which board you wish to purchase.
I have NO association with them by the way.
Cheers,
Leslie
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Re: Digilent's Nexys - Pedro Filipe - Apr 12 10:49:49 2007
Hello to all.
I can only see 200k and 400k versions of the board...
I wish that the 1000k board still was available.
Pedro
04 Apr 2007 09:03:05 -0700, Leslie:
>
> Hi Tony,
> --- In f...@yahoogroups.com, Tony
> wrote:
> > Sorry to veer off topic, but i was going to order one of those myself
> and only
> > saw a 500k gate option?
>
> They come in 200, 400, or 1000 die versions from digilent.
>
> http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS
>
> After you hit the "Add to cart" button, you are presented with a choice
> of which board you wish to purchase.
>
> I have NO association with them by the way.
>
> Cheers,
> Leslie
>
>
>
[Non-text portions of this message have been removed]
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
I can only see 200k and 400k versions of the board...
I wish that the 1000k board still was available.
Pedro
04 Apr 2007 09:03:05 -0700, Leslie
>
> Hi Tony,
> --- In f...@yahoogroups.com
>
> > Sorry to veer off topic, but i was going to order one of those myself
> and only
> > saw a 500k gate option?
>
> They come in 200, 400, or 1000 die versions from digilent.
>
> http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS
>
> After you hit the "Add to cart" button, you are presented with a choice
> of which board you wish to purchase.
>
> I have NO association with them by the way.
>
> Cheers,
> Leslie
>
>
>
[Non-text portions of this message have been removed]
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Re: Digilent's Nexys - Eric Smith - Apr 12 12:35:00 2007
Pedro wrote:
> I can only see 200k and 400k versions of the board...
> I wish that the 1000k board still was available.
They're likely just out of stock of the larger part.
Try again later.
Eric
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
> I can only see 200k and 400k versions of the board...
> I wish that the 1000k board still was available.
They're likely just out of stock of the larger part.
Try again later.
Eric
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
Re: Digilent's Nexys - rtstofer - May 31 7:59:01 2007
--- In f...@yahoogroups.com, "Eric Smith" wrote:
>
> Pedro wrote:
> > I can only see 200k and 400k versions of the board...
> > I wish that the 1000k board still was available.
>
> They're likely just out of stock of the larger part.
> Try again later.
>
> Eric
>
It's back! I am looking at the order page and the 1000die version is
available again.
Richard
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )
>
> Pedro wrote:
> > I can only see 200k and 400k versions of the board...
> > I wish that the 1000k board still was available.
>
> They're likely just out of stock of the larger part.
> Try again later.
>
> Eric
>
It's back! I am looking at the order page and the 1000die version is
available again.
Richard
(You need to be a member of fpga-cpu -- send a blank email to fpga-cpu-subscribe@yahoogroups.com )