Sign in
Search hc11
Subscribe to hc11
Ads
Discussion Groups
M68HC11
Technical discussions about Freescale Microcontrollers: M68HC11. (Freescale Semiconductor is a Subsidiary of Motorola).
Comm Fault using pcbug11 for MicroCore-11 [4 Articles]
senglee88 - Oct 4 2004
Hello everyone,
I own a MicroCore-11 (from Technological Arts).I am currently using
PCBug11 to download my .s19 program using RS232 straight cable (DB9,
Trx(... 
Re: Cant get my m68hc11 to work on my new lab to with x
Nigel Johnson - Oct 3 2004
It sounds like you are using PCBUG11, am I right?
If so, you are encountering an old problem. The fix that I took is to
switch to jbug, which a lot of people ar... Cant get my m68hc11 to work on my new lab to with xp [2 Articles]
peter chabez - Oct 3 2004
Hi,
I'm having problems with installing my evaluation
board on my lab top. I was told it could be the fact
that I'm using XP on this lap top. And the fact the ... Looking for ImageCraft C If Anyone Is Selling
Michael Monteith - Oct 1 2004
I'm looking to see if I can get a copy of ImageCraft C IC11.
However I don't see paying the $200 when I built the board for less
than $100. I'm sure someone out t... Re: List
- Sep 27 2004
Here is my icq list.
++++ Attachment: No Virus found
++++ Norton AntiVirus - www.symantec.de
[Non-text portions of this message have been removed]
... Re: static config reg can not be changed
Mark Schultz - Sep 23 2004
--- In , "jackson_cp" Re: Re: static config reg can not be changed
Tony Papadimitriou - Sep 23 2004
----- Original Message -----
From: "jackson_cp" <>
To: <>
> I have experimented with the idea what you have given. But this time
> also I could not succe... Re: static config reg can not be changed
jackson_cp - Sep 23 2004
> Ok, now I remember why I used the approach I did to initialize my
> system.
>
> The procedure I outlined in my earlier message is not the procedure
> I... Re: static config reg can not be changed
Mark Schultz - Sep 21 2004
Note to John Beatty: See end of this message for a suggestion for a
JBug enhancement.
--- In , "jackson_cp" Re: static config reg can not be changed
jackson_cp - Sep 21 2004
> The short answer to your question is: Yes, it can be done.
>
> I have been working on a project recently that uses a 'F1 in
> expanded mode, with FLASH ma...