2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi,
Was just wondering if anybody has any experience with connecting
some of the SDIO BlueTooth card to LPC21XX system. Is there problem
with obtaining manuf. information to write specific driver or is there
any standard.
Thanks
Radim.





(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Radim,

You can find SD and SDIO information online here:

http://www.sdcard.org/ and http://www.sdcard.org/sdio/index.html

If you are looking for the SD and SDIO specification manuals you can
only get simplified versions of SD, SDIO and SDIO Bluetooth. Full
versions are available after you pay the membership and license
fees which are quite steep :-( Which is too bad, because SDIO
card are perfect for LPCs.

Thanks,
Pawel

----------------------------------------------------------------
http://www.hobby-robotics.net

--- In lpc2000@lpc2..., "radim100" <radim100@y...> wrote:
>
> Hi,
> Was just wondering if anybody has any experience with connecting
> some of the SDIO BlueTooth card to LPC21XX system. Is there problem
> with obtaining manuf. information to write specific driver or is there
> any standard.
> Thanks
> Radim.




(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )