Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | LPC2103
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
LPC2103 - Michal Krestan - Nov 30 13:38:00 2005
Does anybody can tell me, what difference is between LPC2103 and LPC2104? If I'll write my program for LPC2104 and I'll not go over FLASH and RAM size of LPC2103, can I use LPC2103 without any code modification?
Michal
[Non-text portions of this message have been removed]
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: LPC2103 - philips_apps - Nov 30 20:17:00 2005
--- In lpc2000@lpc2..., "Michal Krestan" <krestan@h...> wrote:
> Does anybody can tell me, what difference is between LPC2103 and
LPC2104? If I'll write my program for LPC2104 and I'll not go over
FLASH and RAM size of LPC2103, can I use LPC2103 without any code
modification?
>
> Michal Michal,
most of the code written the way you describe will work.
Exceptions: all code related to the PWM module. The PWM module has
been replaced by two 16-bit timers.
There are many new features on the LPC2103/2/1 compared to the LPC2104.
The ADC, the real-time clock, fast ports, SSP, improved SPI, edge
aligned PWM mode for all the timers.
The trace debugging interface has been removed for this device with
small memory.
hth, Robert
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
> Does anybody can tell me, what difference is between LPC2103 and
LPC2104? If I'll write my program for LPC2104 and I'll not go over
FLASH and RAM size of LPC2103, can I use LPC2103 without any code
modification?
>
> Michal Michal,
most of the code written the way you describe will work.
Exceptions: all code related to the PWM module. The PWM module has
been replaced by two 16-bit timers.
There are many new features on the LPC2103/2/1 compared to the LPC2104.
The ADC, the real-time clock, fast ports, SSP, improved SPI, edge
aligned PWM mode for all the timers.
The trace debugging interface has been removed for this device with
small memory.
hth, Robert
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )