2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

We have posted a new version of the gnuarm tools at
http://www.gnuarm.com, version 4.0.2.  The binaries as well as source
are hosted along with documentation and links to other sites.  If you
find any good sources of ARM info that is not on the site, please let
us know and we will add it.

BTW, this site is paid for by the ads, so if you see something you are
interested in, please click them.  The site uses a *lot* of bandwidth
and the revenue is needed to keep it going.
	

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Please repost, as the files are corrupted.  I tried downloading a few
times.  The web site says the file is > 24MB, but only 19MB downloads, and
doesn't run.

Thanks

On 2/11/06, Rick Collins <gnuarm@gnua...> wrote:
>
>  We have posted a new version of the gnuarm tools at
> http://www.gnuarm.com, version 4.0.2.  The binaries as well as source
> are hosted along with documentation and links to other sites.  If you
> find any good sources of ARM info that is not on the site, please let
> us know and we will add it.
>
> BTW, this site is paid for by the ads, so if you see something you are
> interested in, please click them.  The site uses a *lot* of bandwidth
> and the revenue is needed to keep it going.
>
>
>
>
>
>
>  SPONSORED LINKS
>  
Microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=mfaAujKZXA2Z_vxre9sGnQ>
>
Microprocessor<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=9jjd2D3GOLIESVQssLmLsA>
 Intel
>
microprocessors<http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=OMnZuqMZX95mgutt4B-tDw>
  Pic
>
microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=Malspbd0T4Rq3M4Q0nHrfw>
>  ------------------------------
> >.
>
>
>  ------------------------------
>
	--
Jim Parziale
nuncio.bitis@nunc...
Malden, MA
	[Non-text portions of this message have been removed]
	

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Why don't you run a bittorrent tracker to help minimize your bandwidth. I'm
guessing the target market here could easily handle that.

On 2/12/06, Jim Parziale <nuncio.bitis@nunc...> wrote:
>
>  Please repost, as the files are corrupted.  I tried downloading a few
> times.  The web site says the file is > 24MB, but only 19MB downloads, and
> doesn't run.
>
> Thanks
>
> On 2/11/06, Rick Collins <gnuarm@gnua...> wrote:
> >
> >  We have posted a new version of the gnuarm tools at
> > http://www.gnuarm.com, version 4.0.2.  The binaries as well as source
> > are hosted along with documentation and links to other sites.  If you
> > find any good sources of ARM info that is not on the site, please let
> > us know and we will add it.
> >
> > BTW, this site is paid for by the ads, so if you see something you are
> > interested in, please click them.  The site uses a *lot* of bandwidth
> > and the revenue is needed to keep it going.
> >
> >
> >
> >
> >
> >
> >  SPONSORED LINKS
> >   Microcontrollers<
>
http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=mfaAujKZXA2Z_vxre9sGnQ
> >
> > Microprocessor<
>
http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=9jjd2D3GOLIESVQssLmLsA>
> Intel
> > microprocessors<
>
http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=OMnZuqMZX95mgutt4B-tDw>
> Pic
> > microcontrollers<
>
http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=Malspbd0T4Rq3M4Q0nHrfw
> >
> >  ------------------------------
> > >.
> >
> >
> >  ------------------------------
> >
>
>
>
> --
> Jim Parziale
> nuncio.bitis@nunc...
> Malden, MA
>
>
> [Non-text portions of this message have been removed]
>
>
>
>  SPONSORED LINKS
>  
Microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=mfaAujKZXA2Z_vxre9sGnQ>
>
Microprocessor<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=9jjd2D3GOLIESVQssLmLsA>
 Intel
>
microprocessors<http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=OMnZuqMZX95mgutt4B-tDw>
  Pic
>
microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=Malspbd0T4Rq3M4Q0nHrfw>
>  ------------------------------
> >.
>
>
>  ------------------------------
>
	--
Bryce Schober
	[Non-text portions of this message have been removed]
	

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )