2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Today I test my new board with a LPC2124. I play a bit with the PCONP register to turn off unused resources of the device to save power. First the reset value of the PCONP register is 0x7FFFE that means that bit 18 to 0 is used, but the Usermanual says that are only bit 12 to 0 are used. I reset bit 18..13 and now i save more than 16 mA. It seems that the LPC2124 die is the same as of the LPC2129 with 4 CAN Interfaces but no external CAN Pins. The Keil uVision, I evaluate, says that are 6 CAN Interfaces available at the LPC2124 (some kind of bug or parts of a future device in the sofware??) Has anyone the same experience with the 2124 ? Andreas

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi , any one out there working with a 2124 ? Andreas --- In , "haack0815" <lpc_arm@s...> wrote: > Today I test my new board with a LPC2124. > > I play a bit with the PCONP register to turn off unused resources of > the device to save power. > First the reset value of the PCONP register is 0x7FFFE that means that > bit 18 to 0 is used, but the Usermanual says that are only bit 12 to 0 > are used. > I reset bit 18..13 and now i save more than 16 mA. > It seems that the LPC2124 die is the same as of the LPC2129 with 4 CAN > Interfaces but no external CAN Pins. > The Keil uVision, I evaluate, says that are 6 CAN Interfaces available > at the LPC2124 (some kind of bug or parts of a future device in the > sofware??) > > Has anyone the same experience with the 2124 ? > > Andreas

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )