Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | uCOS-II and LPC210x KickStart Card
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
uCOS-II and LPC210x KickStart Card - guilherme_ferraz - Apr 28 10:21:17 2006
Hi everybody!
Did anyone work with uCOS-II and the kickstart card from IAR?
I=B4m having a problem.
I downloaded the Port for ARM for uCOS-II and there is an application,
but the application does not work fine. I need to press reset button
on the board to start the application.
Seems that software reset does not work.
And I can=B4t download the application on the internal flash memory n
the LPC2106.
Thanks.
=20
=20
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Did anyone work with uCOS-II and the kickstart card from IAR?
I=B4m having a problem.
I downloaded the Port for ARM for uCOS-II and there is an application,
but the application does not work fine. I need to press reset button
on the board to start the application.
Seems that software reset does not work.
And I can=B4t download the application on the internal flash memory n
the LPC2106.
Thanks.
=20
=20
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )