2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

hello,

i have no problems programming lpc2129 using winarm

does any body have the files?
LPC2292-ROM.ld or LPC2294-ROM.ld
LPC2292-RAM.ld or LPC2294-RAM.ld
or anything else that i might be missing?

or could i just edit the LPC2129-ROM.ld, LPC2129-RAM.ld ?
if so, how?

thanks a lot

---------------------------------
Now you can have a huge leap forward in email: get the new Yahoo! Mail.

[Non-text portions of this message have been removed]



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )