2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

----- Original Message -----
From: "Michael Scott"
To:
Sent: Thursday, January 18, 2007 3:36 PM
Subject: RE: [lpc2000] IAR workbench or Rowley CrossWorks
> Looking for opinions on which is best for embedded ARM development.

Why not try them both and see which one you prefer? I prefer the Rowley
debugger, and support is excellent. It also works very well with their new
USB Cross-Connect JTAG interface.

Leon


(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )