Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | Hi!!!!!!
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
Hi!!!!!! - Nimish Rao - Aug 3 4:50:21 2007
hi,
gee guys one more problm here is.i know i used a ulink adaptor to debug the
same.Now we know that the ulink adaptor does not support real time trace but
the thing is where from does the ulink adaptor get the trace info from(not
the real time trace) is it the ETM or the Embedded ICE logic,cos when i saw
the diagram of the ARM Macrocell the JTAG port has connection to both of
them.The question is not that complex but still guys would be greatful
Waiting for a reply guys....
Thanks
Nimish Rao
[Non-text portions of this message have been removed]
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
gee guys one more problm here is.i know i used a ulink adaptor to debug the
same.Now we know that the ulink adaptor does not support real time trace but
the thing is where from does the ulink adaptor get the trace info from(not
the real time trace) is it the ETM or the Embedded ICE logic,cos when i saw
the diagram of the ARM Macrocell the JTAG port has connection to both of
them.The question is not that complex but still guys would be greatful
Waiting for a reply guys....
Thanks
Nimish Rao
[Non-text portions of this message have been removed]
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
=?gb2312?q?=BB=D8=B8=B4=A3=BA=20=20Hi!!!!!!?= - =?gb2312?q?=CC=B7=B1=F8?= - Aug 3 5:11:41 2007
大意看懂了,不过你说的问题我不会呀,我也是刚学LPC2000
你知道 openTCP怎么移植到LPC2000上吗?
Nimish Rao 写道：
hi,
gee guys one more problm here is.i know i used a ulink adaptor to debug the
same.Now we know that the ulink adaptor does not support real time trace but
the thing is where from does the ulink adaptor get the trace info from(not
the real time trace) is it the ETM or the Embedded ICE logic,cos when i saw
the diagram of the ARM Macrocell the JTAG port has connection to both of
them.The question is not that complex but still guys would be greatful
Waiting for a reply guys....
Thanks
Nimish Rao
[Non-text portions of this message have been removed]
---------------------------------
想成为冯小刚、陈凯歌、张纪中三大导演的主角吗？
[Non-text portions of this message have been removed]
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
你知道 openTCP怎么移植到LPC2000上吗?
Nimish Rao
hi,
gee guys one more problm here is.i know i used a ulink adaptor to debug the
same.Now we know that the ulink adaptor does not support real time trace but
the thing is where from does the ulink adaptor get the trace info from(not
the real time trace) is it the ETM or the Embedded ICE logic,cos when i saw
the diagram of the ARM Macrocell the JTAG port has connection to both of
them.The question is not that complex but still guys would be greatful
Waiting for a reply guys....
Thanks
Nimish Rao
[Non-text portions of this message have been removed]
---------------------------------
想成为冯小刚、陈凯歌、张纪中三大导演的主角吗？
[Non-text portions of this message have been removed]
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Hi!!!!!! - derbaier - Aug 3 5:51:40 2007
--- In l...@yahoogroups.com, "Nimish Rao" wrote:
>
> hi,
> gee guys one more problm here is.i know i used a ulink adaptor to
debug the
> same.Now we know that the ulink adaptor does not support real time
trace but
> the thing is where from does the ulink adaptor get the trace info
from(not
> the real time trace) is it the ETM or the Embedded ICE logic,cos
when i saw
> the diagram of the ARM Macrocell the JTAG port has connection to both of
> them.The question is not that complex but still guys would be greatful
> Waiting for a reply guys....
> Thanks
> Nimish Rao
>
Your debugger gets it's information from the EmbeddedICE via the JTAG
port. There is no way to do real time trace that way since ARM must
switch into and out of debug mode for information to pass between the
debugger and hardware. When the Embedded Trace Macrocell is being used
by a debugger capable of using it, then the ETM is controlled via
JTAG, but it's output is via the ETM pins on the chip. Since ETM just
monitors ARM and does not interfere with it, it can trace in real
time. However, the trace parameters must be set up ahead of time via
the JTAG connection. With Lauterbach's Trace-32 both the ETM and JTAG
connections go to the debug pod, and that information all gets back to
the Trace-32 software via an Ethernet connection, with the hardware
setup that I have used.
--Dave
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
>
> hi,
> gee guys one more problm here is.i know i used a ulink adaptor to
debug the
> same.Now we know that the ulink adaptor does not support real time
trace but
> the thing is where from does the ulink adaptor get the trace info
from(not
> the real time trace) is it the ETM or the Embedded ICE logic,cos
when i saw
> the diagram of the ARM Macrocell the JTAG port has connection to both of
> them.The question is not that complex but still guys would be greatful
> Waiting for a reply guys....
> Thanks
> Nimish Rao
>
Your debugger gets it's information from the EmbeddedICE via the JTAG
port. There is no way to do real time trace that way since ARM must
switch into and out of debug mode for information to pass between the
debugger and hardware. When the Embedded Trace Macrocell is being used
by a debugger capable of using it, then the ETM is controlled via
JTAG, but it's output is via the ETM pins on the chip. Since ETM just
monitors ARM and does not interfere with it, it can trace in real
time. However, the trace parameters must be set up ahead of time via
the JTAG connection. With Lauterbach's Trace-32 both the ETM and JTAG
connections go to the debug pod, and that information all gets back to
the Trace-32 software via an Ethernet connection, with the hardware
setup that I have used.
--Dave
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )