Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | programming UART with LPC-2294 and Eclipse
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
programming UART with LPC-2294 and Eclipse - jdauchot - Sep 11 6:53:20 2007
I am having some success in programming a LPC-E2294 demo board using
eclipse GNU compiler
But I am having problem getting the UART to work properly. I have got
the PLL going but I have no idea what freq is locked on to.
I may have problems with the baud rate as get corrupted characters out
of the UART
The timers and LCD display is working OK
Can I use the CPU without the PLL running and program the UART using
the basic XTAL Freq
Regards
Jean-Jacques
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
eclipse GNU compiler
But I am having problem getting the UART to work properly. I have got
the PLL going but I have no idea what freq is locked on to.
I may have problems with the baud rate as get corrupted characters out
of the UART
The timers and LCD display is working OK
Can I use the CPU without the PLL running and program the UART using
the basic XTAL Freq
Regards
Jean-Jacques
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )