2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

I am trying to develop for a futurlec LPC2119 ARM ET Stamp (http://www.futurlec.com/ET-ARM_Stamp.shtml).

It all works fine under Windows and the Codewarrior/Keil package.

I need to develop under Linux/Eclipse/Gnuarm (which I have all set up and working) but I don't have a sample gcc project for the LPC2119 on this particular board so I'm fighting with crt.s and the loader script. I've tried adapting James Lych's tutorial project for a 2106 but it's like drinking from a firehose as I'm new to LPC stuff!

Does anyone have a very simple "blinky leddy" type project they could let me have please or even just a sample loader script and crt.s specifically for this board; I cannot find anything on the net or in the files section here.

Thanks for any help.

Bob



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )