Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | LPC2138 Bootloader
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
LPC2138 Bootloader - thos_fernando - Dec 8 3:57:58 2007
Hello ,
I was testing out H-JTAG on my LPC2138 system, and loaded one of my
working hex files using H-JTAG.
I think I must have over written the Philips bootloader in the
process.Now I cannot flash using the WinARM or philips ISP tool.
Is it possible to get the bootloader going again ?
I read one thread of klemen_dovrtel on this issue which ended abruptly.
Are the bootimage files uploaded by Jayasooriah same as a bootloader ?
" Twentyone " had some bootloader files on his H-JTAG site , but I was
not able to figure out how to use them.
Any support would be appreciated.
Cheers
Thomas
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I was testing out H-JTAG on my LPC2138 system, and loaded one of my
working hex files using H-JTAG.
I think I must have over written the Philips bootloader in the
process.Now I cannot flash using the WinARM or philips ISP tool.
Is it possible to get the bootloader going again ?
I read one thread of klemen_dovrtel on this issue which ended abruptly.
Are the bootimage files uploaded by Jayasooriah same as a bootloader ?
" Twentyone " had some bootloader files on his H-JTAG site , but I was
not able to figure out how to use them.
Any support would be appreciated.
Cheers
Thomas
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: LPC2138 Bootloader - thos_fernando - Dec 8 10:06:24 2007
Hi Dave,
Thanks for that.There was a problem in the ISP part of my circuit.
No trashing of the bootloader as you figured out
Thanks again.
Thomas
--- In l...@yahoogroups.com, "derbaier" wrote:
>
> --- In l...@yahoogroups.com, "thos_fernando" wrote:
> >
> > Hello ,
> >
> > I was testing out H-JTAG on my LPC2138 system, and loaded one of my
> > working hex files using H-JTAG.
> > I think I must have over written the Philips bootloader in the
> > process.Now I cannot flash using the WinARM or philips ISP tool.
> > Is it possible to get the bootloader going again ?
> > I read one thread of klemen_dovrtel on this issue which ended
abruptly.
> > Are the bootimage files uploaded by Jayasooriah same as a bootloader ?
> > " Twentyone " had some bootloader files on his H-JTAG site , but I was
> > not able to figure out how to use them.
> >
> > Any support would be appreciated.
> >
> > Cheers
> > Thomas
> >
> You can get the LPC2138 bootloader here:
>
http://www.standardics.nxp.com/support/documents/microcontrollers/?scope=LPC2000&type=software
>
> I would think that it is pretty unlikely that the H-JTAG FLASHER could
> have trashed the NXP bootloader in your LPC2138 though.
>
> --Dave
>
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Thanks for that.There was a problem in the ISP part of my circuit.
No trashing of the bootloader as you figured out
Thanks again.
Thomas
--- In l...@yahoogroups.com, "derbaier"
>
> --- In l...@yahoogroups.com, "thos_fernando"
> >
> > Hello ,
> >
> > I was testing out H-JTAG on my LPC2138 system, and loaded one of my
> > working hex files using H-JTAG.
> > I think I must have over written the Philips bootloader in the
> > process.Now I cannot flash using the WinARM or philips ISP tool.
> > Is it possible to get the bootloader going again ?
> > I read one thread of klemen_dovrtel on this issue which ended
abruptly.
> > Are the bootimage files uploaded by Jayasooriah same as a bootloader ?
> > " Twentyone " had some bootloader files on his H-JTAG site , but I was
> > not able to figure out how to use them.
> >
> > Any support would be appreciated.
> >
> > Cheers
> > Thomas
> >
> You can get the LPC2138 bootloader here:
>
http://www.standardics.nxp.com/support/documents/microcontrollers/?scope=LPC2000&type=software
>
> I would think that it is pretty unlikely that the H-JTAG FLASHER could
> have trashed the NXP bootloader in your LPC2138 though.
>
> --Dave
>
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Re: LPC2138 Bootloader - Kenneth Crudup - Dec 12 15:32:06 2007
On Sat, 8 Dec 2007, derbaier wrote:
> I would think that it is pretty unlikely that the H-JTAG FLASHER could
> have trashed the NXP bootloader in your LPC2138 though.
That's a masked ROM, right?
-Kenny
--
Kenneth R. Crudup Sr. SW Engineer, Scott County Consulting, Los Angeles
O: 3630 S. Sepulveda Blvd. #138, L.A., CA 90034-6809 (888) 454-8181
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )