Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | Re: LPC2368 UART Query
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
Re: LPC2368 UART Query - siover2001 - Feb 6 7:18:08 2008
--- In l...@yahoogroups.com, "Kiran" wrote:
>
> Hi,
>
> It is regarding UART in the LPC2368.
> UART1 has full modem control pins.
>
> If UART1 is enabled & only Tx, Rx, CTS & RTS are used for UART
communications,
> whether remaining pins (RI, DCD etc.) can be used for other
application (as port pin)?
>
> Regards,
> Kiran
>
> [Non-text portions of this message have been removed]
>
no you cann't use like this. uart terminal can be used for single
application at a time.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
>
> Hi,
>
> It is regarding UART in the LPC2368.
> UART1 has full modem control pins.
>
> If UART1 is enabled & only Tx, Rx, CTS & RTS are used for UART
communications,
> whether remaining pins (RI, DCD etc.) can be used for other
application (as port pin)?
>
> Regards,
> Kiran
>
> [Non-text portions of this message have been removed]
>
no you cann't use like this. uart terminal can be used for single
application at a time.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )