Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | Library LPC2106
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
Library LPC2106 - "M.Dhilip Ravi Sankar" - Mar 10 7:02:28 2008
Hi dudes, I am in neeed of the LPC2106 libraries for ORCAD 9. Can any
one help me with that...
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
one help me with that...
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
RE: Library LPC2106 - Miguel Wisintainer - Mar 10 10:55:38 2008
Or ALTIUM, because exports to ORCARD
To: l...@yahoogroups.comFrom: d...@yahoo.co.inDate: Mon, 10 Mar 200=
8 10:31:50 +0000Subject: [lpc2000] Library LPC2106
Hi dudes, I am in neeed of the LPC2106 libraries for ORCAD 9. Can any one h=
elp me with that...=20
_________________________________________________________________
Cansado de espa=E7o para s=F3 50 fotos? Conhe=E7a o Spaces, o site de relac=
ionamentos com at=E9 6,000 fotos!
http://www.amigosdomessenger.com.br
[Non-text portions of this message have been removed]
=20
=20
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Library LPC2106 - basicnode - Mar 13 3:52:30 2008
> Hi dudes, I am in neeed of the LPC2106 libraries for ORCAD 9. Can any
> one help me with that...
I put an OrCAD version 7 design with an LPC2106 in it. I've had
better luck importing than trying to move from OrCAD 10 to 9.
This was cut from our working ARM stamp design
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
> one help me with that...
I put an OrCAD version 7 design with an LPC2106 in it. I've had
better luck importing than trying to move from OrCAD 10 to 9.
This was cut from our working ARM stamp design
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )