Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | Using the RTC oscillator in LPC-2378
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
Using the RTC oscillator in LPC-2378 - anjali_das78 - May 27 11:35:16 2008
Hi,
I was recently trying to use the the RTC oscillator as the PLL clock
source for LPC-2378. I noticed that if I chose to use the RTC
oscillator on the LPC-2378, uploading and debugging through JTAG was a
problem. The code compiles fine on the Builder but then I had to use
the generated .hex file and a flash tool (like Flash Magic) to upload
the code.
Has anybody experienced such a problem? Is there a solution for this?
Thanks,
Anjali.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I was recently trying to use the the RTC oscillator as the PLL clock
source for LPC-2378. I noticed that if I chose to use the RTC
oscillator on the LPC-2378, uploading and debugging through JTAG was a
problem. The code compiles fine on the Builder but then I had to use
the generated .hex file and a flash tool (like Flash Magic) to upload
the code.
Has anybody experienced such a problem? Is there a solution for this?
Thanks,
Anjali.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )