2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hello everybody,

I would like to use lwIP and I downloaded lpIPWeb.zip from this forum.
I am using MCB2300 with a LPC2378 (it says "MCB2300 on the board but
shouldn't that be MCB2370?) with uVision3 (evaluation).

Now as a first step I loaded lwIPWeb.hex to see what happens.
The only reaction I could see on the board was "lwIPWeb 15:41:32" on
the LCD display.
When I used the browser, the webpage could not be displayed.

I read that Emre Ertas
(http://www.embeddedrelated.com/groups/lpc2000/show/31440.php) had the
same problem but I could not find a solution in any other thread.

Next I compiled the project with Visual C++ 2008 Express Edition. But
after having loaded the file to the board the result was the same.

Finally I modified the project to be compatible with Keil's uVision3,
but the evaluation software only allows 32kB of code. So that was useless.

Does anybody know if there is still a bug in the original lwIPWeb
project or what the problem is?
My LPC2378 is silicon revision "B". So the "PINSEL2 bug" should not be
the reason I suppose.

Regards,
Henry

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

"Next I compiled the project with Visual C++ 2008 Express Edition. "

*blink*

"But after having loaded the file to the board the result was the same."

I guess your second step should be to get a decent IDE (or just compiler)
that properly generates ARM code!

~ Paul Claessen

And no, MCB2300 should NOT be MCB2370. It's just a generic 23xx EVK board
designation from Keil.
They come in different flavors (2378, 2388.)

From: l...@yahoogroups.com [mailto:l...@yahoogroups.com] On Behalf Of
h.belig
Sent: Wednesday, August 27, 2008 10:31 AM
To: l...@yahoogroups.com
Subject: [lpc2000] lwIP for LPC2378 not running

Hello everybody,

I would like to use lwIP and I downloaded lpIPWeb.zip from this forum.
I am using MCB2300 with a LPC2378 (it says "MCB2300 on the board but
shouldn't that be MCB2370?) with uVision3 (evaluation).

Now as a first step I loaded lwIPWeb.hex to see what happens.
The only reaction I could see on the board was "lwIPWeb 15:41:32" on
the LCD display.
When I used the browser, the webpage could not be displayed.

I read that Emre Ertas
(http://www.embeddedrelated.com/groups/lpc2000/show/31440.php) had the
same problem but I could not find a solution in any other thread.

Next I compiled the project with Visual C++ 2008 Express Edition. But
after having loaded the file to the board the result was the same.

Finally I modified the project to be compatible with Keil's uVision3,
but the evaluation software only allows 32kB of code. So that was useless.

Does anybody know if there is still a bug in the original lwIPWeb
project or what the problem is?
My LPC2378 is silicon revision "B". So the "PINSEL2 bug" should not be
the reason I suppose.

Regards,
Henry

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )