2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Dear all,

I am working on a project to use SNTP protocol to transmit
UTC time to other systems. But I can't seem to find any formula to convert
the UTC timestamp to human readable format which is needed so that I could
update the date and time of my RTC. It would be a big help if anybody can
send me any helpful link or if possible the formula itself.

Thanks in advance

Best Regards,

Nishant Agrawal,

Real Time Solutions Pvt. Ltd.,

58 Samarpan Marg, Tripureshwore,

Kathmandu, Nepal.

Ph: 01-4253717,

Mobile: 9841259267

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Nishant Agrawal schrieb:
> Dear all,
>
> I am working on a project to use SNTP protocol to transmit
> UTC time to other systems. But I can't seem to find any formula to convert
> the UTC timestamp to human readable format which is needed so that I could
> update the date and time of my RTC. It would be a big help if anybody can
> send me any helpful link or if possible the formula itself.

See this thread (found with google):
http://fixunix.com/ntp/395370-sntp-client.html

--
42Bastian

Note: SPAM-only account, direct mail to bs42@...

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )