Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | create bus for graphic LCD
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
create bus for graphic LCD - "franco.dalpero" - Oct 14 16:03:24 2008
Hi at all
I must connect one graphic LCD at one board with LPC2388, this LCD is
place at 70cm from board, I can use one flat cable and connect direct
pin from micro Processor at the display or I must insert one buffer in
the data e control line,(ex 74hc244 or ?????)what is the schematic?
Thanks
Franco
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I must connect one graphic LCD at one board with LPC2388, this LCD is
place at 70cm from board, I can use one flat cable and connect direct
pin from micro Processor at the display or I must insert one buffer in
the data e control line,(ex 74hc244 or ?????)what is the schematic?
Thanks
Franco
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: create bus for graphic LCD - senhoruilson - Oct 15 1:59:23 2008
--- In l...@yahoogroups.com, "franco.dalpero"
wrote:
>
> Hi at all
> I must connect one graphic LCD at one board with LPC2388, this LCD is
> place at 70cm from board, I can use one flat cable and connect direct
> pin from micro Processor at the display or I must insert one buffer in
> the data e control line,(ex 74hc244 or ?????)what is the schematic?
>
> Thanks
> Franco
>
Hi, i am working with lpc2148 and a ks0108 LCD and i use no buffer. it
is working quite well (needs some adjustments yet). I dont realy think
i understood your question but maybe i can help.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
wrote:
>
> Hi at all
> I must connect one graphic LCD at one board with LPC2388, this LCD is
> place at 70cm from board, I can use one flat cable and connect direct
> pin from micro Processor at the display or I must insert one buffer in
> the data e control line,(ex 74hc244 or ?????)what is the schematic?
>
> Thanks
> Franco
>
Hi, i am working with lpc2148 and a ks0108 LCD and i use no buffer. it
is working quite well (needs some adjustments yet). I dont realy think
i understood your question but maybe i can help.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )