2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi all Any one using the "hitex" tool's for the LPC2xxx ? I would like to know your impression from the tool Regards Bobi ---------------------------------

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi Bobi, I started with a startekit from hitex and now I work with the full Tanto system with ETM support. When I started there were some stability problems with the user interface but they are now solved and the systems are working well. With the Hitex tools it is convenient to start because they add a lot of examples which can be used as prototype for the own project. The problems I had were all solved fast by the Hitex tech. support. I can recommend Hitex. Regards Sigi --- In , bobi catorski <bobi_cat2000@y...> wrote: > Hi all > > Any one using the "hitex" tool's for the LPC2xxx ? > > I would like to know your impression from the tool > > Regards > > Bobi > > > ---------------------------------

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )