2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hello,

have anybody an example for the gnu toolchain (makefile, linker file,
etc) for the LPC2478 for me?

Regards Benedikt
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

here is the makefile,LD, startup code and an example prog... But I feel there is something wrong when you use an interrupt... it goes into an infinite loop.. not sure why... will you try to find out what the problem is and let me know.

Raj

--- On Sat, 11/8/08, benedikt.sauter wrote:
From: benedikt.sauter
Subject: [lpc2000] Need a GCC example/linker/startup for lpc2478
To: l...@yahoogroups.com
Date: Saturday, November 8, 2008, 12:38 AM

Hello,

have anybody an example for the gnu toolchain (makefile, linker file,

etc) for the LPC2478 for me?

Regards Benedikt

[Non-text portions of this message have been removed]
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )