Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | IAR with Olimex JTAG Devices
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
IAR with Olimex JTAG Devices - Kevin Townsend - Jan 3 7:25:57 2009
I wanted to try IARs compiler to compare the output, and also because
many examples I've found on the web are written for IAR (notably
Olimex). Unfortunately, I'm not all that eager to purchased ANOTHER
JTAG device when I already own an ARM-USB-OCD and an ARM-USB-TINY.
I was on Olimex's website that you can apparently use the GDB Server
option in IAR to make their debuggers work with IAR, but I'm not really
sure how this is possible. Presumably, I need to install something
like OpenOCD? Does anyone have any advice/experience getting the
Olimex debuggers to play well with IAR? I couldn't find much via
Google, though maybe it's just a problem of terms (IAR OpenOCD Olimex,
etc.)
Kevin.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
many examples I've found on the web are written for IAR (notably
Olimex). Unfortunately, I'm not all that eager to purchased ANOTHER
JTAG device when I already own an ARM-USB-OCD and an ARM-USB-TINY.
I was on Olimex's website that you can apparently use the GDB Server
option in IAR to make their debuggers work with IAR, but I'm not really
sure how this is possible. Presumably, I need to install something
like OpenOCD? Does anyone have any advice/experience getting the
Olimex debuggers to play well with IAR? I couldn't find much via
Google, though maybe it's just a problem of terms (IAR OpenOCD Olimex,
etc.)
Kevin.
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: IAR with Olimex JTAG Devices - v_sark - Feb 4 7:33:07 2009
--- In l...@yahoogroups.com, "Kevin Townsend" wrote:
>
> I wanted to try IARs compiler to compare the output, and also because
> many examples I've found on the web are written for IAR (notably
> Olimex). Unfortunately, I'm not all that eager to purchased ANOTHER
> JTAG device when I already own an ARM-USB-OCD and an ARM-USB-TINY.
>
> I was on Olimex's website that you can apparently use the GDB Server
> option in IAR to make their debuggers work with IAR, but I'm not really
> sure how this is possible. Presumably, I need to install something
> like OpenOCD? Does anyone have any advice/experience getting the
> Olimex debuggers to play well with IAR? I couldn't find much via
> Google, though maybe it's just a problem of terms (IAR OpenOCD Olimex,
> etc.)
>
> Kevin.
>
You need to download and install OpenOCD. I think that the newest
version was 7.17!?
I have used ARM-USB-OCD with IAR and it works fine. If you need
additional info how to set up the GDB write me an email and I will
send you information you need
Sark
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
>
> I wanted to try IARs compiler to compare the output, and also because
> many examples I've found on the web are written for IAR (notably
> Olimex). Unfortunately, I'm not all that eager to purchased ANOTHER
> JTAG device when I already own an ARM-USB-OCD and an ARM-USB-TINY.
>
> I was on Olimex's website that you can apparently use the GDB Server
> option in IAR to make their debuggers work with IAR, but I'm not really
> sure how this is possible. Presumably, I need to install something
> like OpenOCD? Does anyone have any advice/experience getting the
> Olimex debuggers to play well with IAR? I couldn't find much via
> Google, though maybe it's just a problem of terms (IAR OpenOCD Olimex,
> etc.)
>
> Kevin.
>
You need to download and install OpenOCD. I think that the newest
version was 7.17!?
I have used ARM-USB-OCD with IAR and it works fine. If you need
additional info how to set up the GDB write me an email and I will
send you information you need
Sark
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )