2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi, i want to update my application with the bootloader of the LPC2106 over a RS-485 bus. Unfortunately, it is only a half-duplex bus and the RS-485 driver-ic has to be switched between rx and tx. So my questions: Does the ISP programs (Philips, other...) and the bootloader need full-duplex? Is it possible to modify the bootloader (to switch the RS-485-IC between rx and tx)? Thanks for all hints... Regards Arvid

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )