Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | LPC2888 IRQ Problem.
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
LPC2888 IRQ Problem. - "prashant.medical" - Nov 3 4:12:57 2009
Hi,
I am working on Olimex-LPC-H2888 board and using the USBMem code from NXP.
The strange thing that i am observing when i connect the device with the PC is that the code isn't going into the USB ISR at all. So it's always showing as "USB Device Not recognized".
Anybody faced this problem?
If there is any workaround, pls let me know.
With regards,
Prashant
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I am working on Olimex-LPC-H2888 board and using the USBMem code from NXP.
The strange thing that i am observing when i connect the device with the PC is that the code isn't going into the USB ISR at all. So it's always showing as "USB Device Not recognized".
Anybody faced this problem?
If there is any workaround, pls let me know.
With regards,
Prashant
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )