2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Does anyone have an example or instruction on compiling a simple program of some sort for this chip. I have installed the Cygnus GnuC compiler, but I haven't figured out how you get it to compile something I can download to the chip yet. I looked back thru the messages and read where some of you were doing this for other chips, but you didn't really have anything at that time for the 2106 yet. Thanks

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hello, have a look at lpc2106_gcc.zip at http://groups.yahoo.com/group/lpc2100/files/ It contains a basic project for the LPC2106 and GCC Greetings, Martin ----- Original Message ----- From: "earlwb" <> To: <> Sent: Sunday, January 11, 2004 5:41 PM Subject: [lpc2100] Compiling a program for the ARM 2106 chip > Does anyone have an example or instruction on compiling a simple > program of some sort for this chip. > > I have installed the Cygnus GnuC compiler, but I haven't figured out > how you get it to compile something I can download to the chip yet. > > I looked back thru the messages and read where some of you were > doing this for other chips, but you didn't really have anything at > that time for the 2106 yet. > Thanks

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )