2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi all,

Are there guys using gdb-jtag-arm from Tobias Lorenz ?
Do you have any advice about this ?

If the gdb-jtag-arm was successfully tested by some of you, I will
re-write the jtag.c, to be able to use gdb-jtag-arm socket with the
raven jtag interface.

Let me know,

Laurent





(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

--- In lpc2000@lpc2..., "larry_amontec" <larry_amontec@y...>
wrote:
>
> Hi all,
>
> Are there guys using gdb-jtag-arm from Tobias Lorenz ?
> Do you have any advice about this ?
>
> If the gdb-jtag-arm was successfully tested by some of you, I will
> re-write the jtag.c, to be able to use gdb-jtag-arm socket with the
> raven jtag interface.
>
> Let me know,
>
> Laurent

here are the links I just found for it :
http://gdb-jtag-arm.sourceforge.net/
http://sourceforge.net/projects/gdb-jtag-arm/



______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.


(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

I got the source-forge code to work with the wriggler to read and write
memory. That was all I needed to do and it worked ok. Very slow through
a wriggler so with a raven it should be a bit quicker...

-----Original Message-----
From: valdef78 [mailto:valdef@vald...]
Sent: Sunday, 3 April 2005 2:19 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: gdb-jtag-arm
--- In lpc2000@lpc2..., "larry_amontec" <larry_amontec@y...>
wrote:
>
> Hi all,
>
> Are there guys using gdb-jtag-arm from Tobias Lorenz ?
> Do you have any advice about this ?
>
> If the gdb-jtag-arm was successfully tested by some of you, I will
> re-write the jtag.c, to be able to use gdb-jtag-arm socket with the
> raven jtag interface.
>
> Let me know,
>
> Laurent

here are the links I just found for it :
http://gdb-jtag-arm.sourceforge.net/
http://sourceforge.net/projects/gdb-jtag-arm/
Yahoo! Groups Links

--
This email is confidential and intended solely for the use of the individual to whom it is addressed.
Any views or opinions presented are solely those of the author and do not necessarily represent those of NAUTRONIX LTD.

If you are not the intended recipient, you have received this email in error and use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please contact the sender.

Although our computer systems use active virus protection software, and we take various measures to reduce the risk of viruses being transmitted in e-mail messages and attachments sent from this company, we cannot guarantee that such e-mail messages and attachments are free from viruses on receipt. It is a condition of our using e-mail to correspond with you, that any and all liability on our part arising directly or indirectly out of any virus is excluded. Please ensure that you run virus checking software on all e-mail messages and attachments before reading them.




(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )