Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | LPC2214: UART1 (DTR, CTS, DSR, ...)
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
LPC2214: UART1 (DTR, CTS, DSR, ...) - skymab - May 26 13:22:00 2005
Hi,
is it possible just to use RDX1 and TDX1 (like UART0) without the
additional signals like DTR, CTS, DSR and so on ... ?
Because I need the I/O pins which are occupied by these control lines
for other things.
Thomas
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
is it possible just to use RDX1 and TDX1 (like UART0) without the
additional signals like DTR, CTS, DSR and so on ... ?
Because I need the I/O pins which are occupied by these control lines
for other things.
Thomas
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: LPC2214: UART1 (DTR, CTS, DSR, ...) - Karl Olsen - May 26 15:58:00 2005
--- In lpc2000@lpc2..., "skymab" <skymab@g...> wrote:
> is it possible just to use RDX1 and TDX1 (like UART0) without the
> additional signals like DTR, CTS, DSR and so on ... ?
> Because I need the I/O pins which are occupied by these control
> lines for other things.
Yes. Just configure the other pins as GPIO or whatever, in the
PINSELx registers. Works for me in the LPC2114.
Karl Olsen
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
> is it possible just to use RDX1 and TDX1 (like UART0) without the
> additional signals like DTR, CTS, DSR and so on ... ?
> Because I need the I/O pins which are occupied by these control
> lines for other things.
Yes. Just configure the other pins as GPIO or whatever, in the
PINSELx registers. Works for me in the LPC2114.
Karl Olsen
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Re: LPC2214: UART1 (DTR, CTS, DSR, ...) - barry gordon - May 26 19:29:00 2005
Yes. I have both UARTs configured the same way, RDX
and TDX only.
--- Karl Olsen <kro@kro@...> wrote:
> --- In lpc2000@lpc2..., "skymab"
> <skymab@g...> wrote:
>
> > is it possible just to use RDX1 and TDX1 (like
> UART0) without the
> > additional signals like DTR, CTS, DSR and so on
> ... ?
> > Because I need the I/O pins which are occupied by
> these control
> > lines for other things.
>
> Yes. Just configure the other pins as GPIO or
> whatever, in the
> PINSELx registers. Works for me in the LPC2114.
>
> Karl Olsen __________________________________________________
">http://mail.yahoo.com
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
and TDX only.
--- Karl Olsen <kro@kro@...> wrote:
> --- In lpc2000@lpc2..., "skymab"
> <skymab@g...> wrote:
>
> > is it possible just to use RDX1 and TDX1 (like
> UART0) without the
> > additional signals like DTR, CTS, DSR and so on
> ... ?
> > Because I need the I/O pins which are occupied by
> these control
> > lines for other things.
>
> Yes. Just configure the other pins as GPIO or
> whatever, in the
> PINSELx registers. Works for me in the LPC2114.
>
> Karl Olsen __________________________________________________
">http://mail.yahoo.com
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )