Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | What difference between wiggler and SDT JTAG?
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
What difference between wiggler and SDT JTAG? - dairlom - Aug 3 14:27:00 2005
Hi!I have seen some introductions about using of JTAG in ARM.In these
paper,main board connect to PC by JTAG adapter.But,two JTAG adapter be
used,the wiggler and the SDT.
The pin of JTAG adapter connect to PC parallel port pin is different.
now ,I want to use lpc2292 and ADS1.2 development IDE to design a
productor,cna I use the wiggler JTAG without additional software? or
cna I use SDT JTAG in ADS1.2?
thanks!!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
paper,main board connect to PC by JTAG adapter.But,two JTAG adapter be
used,the wiggler and the SDT.
The pin of JTAG adapter connect to PC parallel port pin is different.
now ,I want to use lpc2292 and ADS1.2 development IDE to design a
productor,cna I use the wiggler JTAG without additional software? or
cna I use SDT JTAG in ADS1.2?
thanks!!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )